Random Play; To Change Display Modes (With Cd Function Mode) - Pioneer XC-L7 Operating Instructions Manual

Stop button
RANDOM PLAY
(This operation can be performed on the display unit
or remote control unit)
This function plays ali tracks of a dise in random or-
der.
1. Perform steps 1-3 for repeat play (= P. 31).
2. Use the Ed, E buttons to select "RANDOM
PLAY."
C4}
3. Press the SET button.
SET
(4)
FM /AM/STATION
m@ To cancel random play
Press the stop button (m) to interrupt play.
NOTES: ee
@ During random play, pressing the By] (| Fy] |
button) will cause the currently playing track to
stop playing, and playback will change to another
randomly selected track.
® During random play, selecting all-track repeat (cP.
31) will cause random playback to be repeated (ran-
dom repeat).
Display example:
))
&) <ARB7126> En
Stop button
TO CHANGE DISPLAY MODES :
When the CD function has been selected:
@ Use the remote control unit's DISPLAY button.
Each time the button is pressed the function
changes in the following sequence:
. To change the brightness
When CD is stopped B !evel of the display (DIM-
MER 1-5), =F P. 39.
[1} Total tracks, total playing
time
Current date and time
Display brightness level
(DIMMER 1 - DIMMER 5)
Display during CD playback |
Display when recording
from CD to MD:
[|] Name of MD track
(scrolling display)
[] MD recording track
number and record-
ing time
(J MD recording track
number and remain-
ing recording time
Display when recording
from CD to tape:
[1] Elapsed playing
time
Remaining playing
time of current track
Total remaining
playing time
[4] Total wads and to-
tal playing time
|_| Tape counter
@ During CD to MD or
CD to tape two re-
cording, the res-
pective data shown
are added between
display steps [4] and
{5]of the CD playback
data display.
During random play, display [3] is not shown.
Current date and
time
[6] Display brightness
(DIMMER 1-5}