Other Settings; The Input Assign Menu - Pioneer VSX-1015TX Operating Instructions Manual

11

Other Settings

Chapter 11:
Other Settings

The Input Assign menu

You only need to make settings in the Input Assign menu
if you didn't hook up your digital equipment according to
the default settings for the digital inputs, or if you have
connected equipment using component video cables.
1 Switch on the receiver and your TV.
Use the RECEIVER button to switch on.
2 Press RECEIVER on the remote control, then press
the SYSTEM SETUP button.
An on-screen display (OSD) appears on your TV. Use the
buttons and ENTER on the remote control to
navigate through the screens and select menu items.
Press RETURN to confirm and exit the current menu.
3 Select 'Input Assign' from the System Setup
menu.
System Setup
[ 1. Surr Back System
[ 2. AUTO MCACC
[ 3. MANUAL MCACC
[ 4. Manual SP Setup
[ 5. Input Assign
[ 6. Other Setup
Enter : Select
Return : Exit
62
En
INPUT
RECEIVER SOURCE
SELECT
DVD/LD TV/SAT DVR/VCR TV CONT
MULTI CONTROL
CD CD-R/TAPE TUNER RECEIVER
INPUT ATT FL DIMMER SR
DISC
10
ENTER
D.ACCESS CLASS
TOP MENU MENU
TUNE
ST ST
DTV MENU
ENTER
BAND
T.EDIT
TUNE
SYSTEM
SETUP
GUIDE RETURN
TV CONTROL
INPUT
VOL
TV VOL TV CH
SELECT
DTV ON/OFF REC DTV INFO MUTE
TUNER
REC STOP
DISPLAY
MPX CH RETURN
HDD DVD
AUDIO SUBTITLE
5. Input Assign
] [ a . Digital Input
] [ b . Component Input
]
]
]
]
Assigning the digital inputs
• Default settings:
Digital-1 (optical) – TV/SAT
Digital-2 (optical) – CD-R
Digital-3 (coaxial) – DVD/LD
Digital-4 (coaxial) – CD
You only need to do this if you didn't hook up your digital
equipment according to the default settings for the
digital inputs (see above). This setting tells the receiver
what digital equipment is hooked up to which terminal so
the buttons on the remote correspond to what you have
hooked up.
1 Select 'Digital Input' from the Input Assign menu.
2 Select the number of the digital input to which
you've connected your digital component.
The numbers correspond with the numbers beside the
inputs on the back of the receiver.
3 Select the component that corresponds with the
one you connected to that input.
Select between DVD/LD, TV/SAT, DVR, VIDEO1, CD-R,
CD or OFF.
• Use the
to do this.
• If you assign a digital input to a certain function (for
example, DVD/LD) then any digital inputs previously
assigned to that function will automatically be
]
]
switched off.
4 When you're finished, press RETURN.
You will return to the Input Assign menu.
5. Input Assign
[ a . Digital Input ]
[ b . Component Input ]
5a. Digital Input
Digital - 1 [ TV/SAT ]
Digital - 2 [ CD-R ]
Digital - 3 [ DVD/LD ]
Digital - 4 [ CD ]
(cursor left/right) buttons and ENTER