Power Cord Caution; Operating Other Pioneer Components - Pioneer VSX-1015TX Operating Instructions Manual

Connecting up

Power cord caution

Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short
circuit or an electric shock. Do not place the unit, a piece
of furniture, etc., on the power cord, or pinch the cord.
Never make a knot in the cord or tie it with other cords.
The power cords should be routed such that they are not
likely to be stepped on. A damaged power cord can cause
a fire or give you an electrical shock. Check the power
cord once in a while. When you find it damaged, ask your
nearest Pioneer authorized independent service
company for a replacement.

Operating other Pioneer components

Many Pioneer components have SR CONTROL jacks
which can be used to link components together so that
you can use just the remote sensor of one component.
When you use a remote control, the control signal is
passed along the chain to the appropriate component.
Note that if you use this feature, make sure that you also
have at least one set of analog audio or video jacks
connected to another component for grounding
purposes.
IN
OUT
CONTROL
Receiver
Other Pioneer products
with CONTROL terminals
Remote
control
unit
Note
• If you want to control all your components using this
receiver's remote control, refer to Controlling the rest
of your system on page 52.
• If you have connected a remote control to the
CONTROL IN jack (using a mini-plug cable), you
won't be able to control this unit using the remote
sensor.
CONTROL
IN
OUT
Connect to CONTROL
terminal of other
Pioneer products
03
23
En