Using The Sr+ Mode With A Pioneer Plasma Display - Pioneer VSX-1015TX Operating Instructions Manual

Other connections
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
Before you can use the extra SR+ features, you need to
make a few settings in the receiver. See SR+ Setup for
Pioneer plasma displays on page 65 for detailed
instructions.
VIDEO
Pioneer plasma
INPUT 1
display
DVD player
DVD
AUDIO IN
LISTENING MODE
SELECT
STANDBY/ON
ENTER
MULTI JOG
TUNER TUNING/
EDIT STATION BAND
TUNER MULTI
CONTROL JOG
SYSTEM INPUT
SETUP RETURN ATT
MULTI JOG
PHONES
VSX-1015TX
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
Note
• The 3-ringed SR+ cable from Pioneer is commer-
cially available under the part number ADE7095.
Contact the Pioneer Customer Support division for
more information on obtaining an SR+ cable (you
can also use a commercially available 3-ringed mini
phone plug for the connection).
VIDEO
INPUT 2
Satellite receiver, etc
TV/SAT
AUDIO IN
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-1015TX
DVD/LD TV/SAT DVR/VCR VIDEO1
CD-R/
CD TAPE/MD TUNER VIDEO2
MASTER VOLUME
MIDNIGHT/ ACOUSTIC DIALOG MULTI CH SIGNAL EXTENDED
MPX LOUDNESS TONE EQ ENHANCEMENT IN SELECT MODE SPEAKERS
MULTI
JOG
VIDEO2 INPUT
FL
MCACC
DIMMER SETUP MIC
DIGITAL IN S-VIDEO VIDEO L AUDIO R
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on
page 65 for more on setting up the receiver.
INPUT
RECEIVER
SELECT
DVD/LD TV/SAT
MULTI CONTROL
CD CD-R/TAPE
INPUT ATT
+10
D.ACCESS
TOP MENU
TUNE
ST
DTVMENU
1 Make sure that the plasma display and this
receiver are switched on and that they are
connected with the SR+ cable.
See Using this receiver with a Pioneer plasma display
above for more on connecting these components.
2 To switch SR+ mode on/off, press RECEIVER, then
the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
Note
• The automatic volume muting feature is enabled
separately; see SR+ Setup for Pioneer plasma displays
on page 65.
SOURCE
DVR/VCR TV CONT
TUNER RECEIVER
FL DIMMER SR
DISC
ENTER
CLASS
MENU
ST
10
61
En