FABIA 2000
1.4/55; 1.4/74 Engine - Mechanical Components
–
Screw adapter -V.A.G 1318/20-1- onto adapter
-V.A.G 1318/20-.
–
Turn the valve (at T-union) anti-clockwise, until it is ful-
ly opened.
–
Screw adapter -V.A.G 1318/20- fully onto the vent
valve.
–
Connect hose with catch pan to adapter -V.A.G 1318/
20-1-.
–
Screw valve (at T-union) clockwise up to the stop into
the vent valve.
–
Check the adapter and hose connections for tight-
ness.
–
Activate remote control -V.A.G 1348/3A-.
–
As soon as fuel flows out of the hose without bubbles,
unscrew valve (at T-union) anti-clockwise, until no
more fuel escapes.
–
Place vent valve with a clean cloth underneath.
–
Throttle the ventilation hose and pull off from adapter
-V.A.G 1318/20-1-.
–
Unscrew adapter -V.A.G 1318/20- from vent valve.
–
Screw in ventilation valve cap.
–
Install engine cover with air filter.
Inspecting the operating and holding
pressure of the fuel, inspecting the non-
return valve of the fuel pump
Inspecting the fuel operating pressure
Special tools, test and measuring equipment and
auxiliary items required
♦
Remote control, e.g. -V.A.G 1348/3A- with adapter
cable -V.A.G 1348/3-2-
♦
Pressure gauge appliance, e.g. -V.A.G 1318-
♦
Adapter, e.g. -V.A.G 1318/1-
♦
Adapter, e.g. -V.A.G 1318/11-
♦
Adapter, e.g. -V.A.G 1318/17-
♦
Vehicle system tester -V.A.G 1552- with cable
-V.A.G 1551/3, 3A, 3B nebo 3C-
–
Pull off the fuel feed line -arrow- and gather residual
fuel in a cloth.
Edition 05.05
S00.5306.06.20
Removing and installing parts of the fuel supply system
20
S10-0099
20-1
11
page