FABIA 2000
1.4/55; 1.4/74 Engine - Mechanical Components
19 – Cooling
19-1
Parts of the Cooling Sys-
tem
Note
♦
When the engine is warm the cooling system is under
pressure. Before repairs, if necessary reduce pres-
sure by opening the cap on the coolant expansion res-
ervoir.
♦
The hose connections are secured with spring-type
clips. In the event of repairs only use spring-type clips.
♦
After replacing the cylinder head, replace all the cool-
ant.
♦
The arrows affixed to the coolant pipes and the cool-
ant hoses must stand opposite to each other.
Parts of the cooling system fitted to body
1 - Radiator
removing and installing
⇒ 19-1 page 6
after replacing fill entire sys-
tem with fresh coolant
2 - O-ring
replace
3 - Top coolant hose
secure to radiator with retain-
ing clip
connection diagram for cool-
ant hoses ⇒ 19-1 page 5
4 - Fan shroud
5 - 10 Nm
6 - Auxiliary fan
only on vehicles with air con-
ditioning
7 - Fan holder
8 - Clip
check tightness
9 - Connector
10 - Fan for radiator
11 - To the coolant regulator
housing
⇒ item 7 in 19-1 page 3
connection diagram for cool-
ant hoses ⇒ 19-1 page 5
12 - Expansion reservoir
Inspect cooling system with
coolant system tester, e.g.
-V.A.G 1274- and adapter
-V.A.G 1274/8- for leaks.
13 - Cap
Edition 05.05
S00.5306.06.20
1
2
18
19
19
19
18
17
9
16
15
14
9
13
5
12
Parts of the Cooling System
3
11
10
9
7
19
4
5
6
5
8
S19-0073
19-1
1
page