Cylinder Block - Skoda FABIA 2000 Workshop Manual

FABIA 2000 1.4/55; 1.4/74 Engine - Mechanical Components
13-2 Removing and installing

cylinder block

Aluminium cylinder block
WARNING!
The crankshaft must not be removed. Merely re-
leasing the crankshaft bearing cover will result in
deformations of the bearing seats of the cylinder
block.
If the bearing cover screws have been released, re-
place the complete cylinder block together with the
crankshaft.
Note
Repairing the clutch ⇒ Gearbox 02T; Rep. Gr. 30
1 - 10 Nm
2 - Suction line
out of plastic
as of 06.04 for vehicles with
a manual gearbox
3 - Suction line
out of metal
as of 06.04 only for vehicles
with an automatic gearbox
4 - Cylinder block
5 - Knock sensor
6 - 20 Nm
The tightening torque influ-
ences the knock sensor func-
tion
7 - 60 Nm + torque a further
turn (90°)
replace
8 - Flywheel/driver plate
for removing and installing
the flywheel use the counter-
holder -MP 1-223-
removing and installing drive
plate ⇒ 13-2 page 3
9 - Intermediate plate
must be positioned on dowel
sleeves
do not damage/bend during
assembly work
10 - 12 Nm
replace
11 - Sealing flange with rotor and
gasket ring
always replace complete with gasket ring and rotor
removing and installing sealing flange ⇒ 13-2 page 4
Edition 05.05
S00.5306.06.20
1
/
4
Removing and installing cylinder block
13
13-2 1
page