Safety Precautions When Working On The Fuel Supply System; Rules Of Cleanliness - Skoda FABIA 2000 Workshop Manual

1.4/55; 1.4/74 engine - mechanical components
Hide thumbs Also See for FABIA 2000:
Table of Contents

Advertisement

FABIA 2000
1.4/55; 1.4/74 Engine - Mechanical Components
Fig. 1:
Installation position of flange of fuel deliv-
ery unit
Marking on the flange must be aligned with marking on
the fuel tank -arrows-.
Blue return-flow line -1- on the connection with the mark-
ing -R-.
Black feed line -2- on the connection with the marking -V-.
Note
After installing the flange of the fuel delivery unit, check
whether the feed, return-flow and vent lines are still
clipped in place on the fuel tank.
Fig. 2:
Inspect vent valve
Lever in off position: Valve closed.
Lever pushed in direction of arrow: Valve open.
Note
Before installing the vent valve, unscrew cap of fuel tank.
Safety precautions when working on the
fuel supply system
WARNING!
The fuel feed line is pressurized! Place a clean
cleaning cloth around the connection point before
detaching hose connections. Reduce pressure by
carefully releasing the connection point.
Pay attention to the following points when removing and
installing the fuel gauge sender or the fuel pump (fuel de-
livery unit) on a fuel tank that is filled or partially filled:
The extraction hose of an exhaust extraction system
which is switched on, must be positioned close to the
assembly opening of the fuel tank in order to extract
the released fuel gases, even before the work is com-
menced. If no exhaust extraction system is available,
a radial fan (motor not in air flow of fan) with a delivery
volume of more than 15 m
Avoid skin contact with fuel! Wear fuel-resistant
gloves!

Rules of cleanliness

Carefully observe the following „5 rules for cleanliness"
when working on the fuel supply and injection system:
Thoroughly clean the connection points and their sur-
roundings before releasing.
Place removed parts on a clean surface and cover. Do
not use fuzzy cloths!
Edition 05.05
S00.5306.06.20
3
/h must be used.
Removing and installing parts of the fuel supply system
2
V
R
1
A20-0096
V20-1040
20-1
page
20
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents