Coolant Pump - Summary Of Components - Skoda FABIA 2000 Workshop Manual

19

Coolant pump - Summary of components

1 - Main drive-toothed belt
before removing mark run-
ning direction
check for wear
do not kink
Toothed belt routing
⇒ Chapter 13-1
removing and installing, ten-
sioning ⇒ Chapter 13-1
2 - Coolant pump
with integrated gasket -
warning - it must not be re-
moved from the pump
replace completely if untight
or damaged
check smooth operation
removing and installing
⇒ 19-1 page 7
3 - 10 Nm
4 - Rear timing belt guard
5 - Top toothed belt guard
6 - Bottom toothed belt guard
7 - 12 Nm
replace
8 - V-ribbed belt pulley
pay attention to locating ele-
ment when installing
removing and installing V-
ribbed belt ⇒ Chapter 13-1
9 - 90 Nm + torque a further
turn (90 °)
replace
tightening may occur in successive stages
the turning angle can be measured with a commercially available angle measuring plate, e.g. -Hazet 6690-.
10 - 50 Nm
11 - Guide pulley
12 - 20 Nm
13 - Crankshaft toothed belt sprocket
pay attention to locating element when installing
19-1 4
page
FABIA 2000
1
/
4
Parts of the Cooling System
1.4/55; 1.4/74 Engine - Mechanical Components
Edition 05.05
S00.5306.06.20