Calf Belt; Leg Supports - Meyra SMART 9.906 Operating Manual

CALF BELT

The calf belt (1) prevents the feet from
sliding off the back of the footplates.
It is guided around special ligament
(2) and adjusted in length with a vel-
cro fastener.
Attention:
!
Do not drive without the calf belt.
– Danger of accidents!
☞
The leg strap is omitted for height
adjustable leg supports and is re-
placed by a leg padding.

LEG SUPPORTS

Attention:
!
Do not use the leg supports (3) to
lift or carry the wheelchair.
•
Lift the feet, respectively place
them on the footplates before
each movement of the wheelchair.
•
The operating module is to be
switched off:
– before placing the feet on the
fl oor,
– to remove the calf belt and the leg
support,
– before folding up the footplates.
3
1
2
27