Line Key - Mitel 6930 User Manual

The following figures illustrate the above scenario (i.e. the configuration of top softkey 12) and how
it is displayed on the phone:
Note: Contact your System Administrator for other softkey display behavior options.

Line Key

Note: Line functionality can only be programmed on the top softkeys.
The Line 1 and Line 2 softkeys are autoconfigured in the 6930 SIP phone due to the absence of
Line 1 and Line 2 hardkeys. By default, the line values for top softkey 1 and topsoftkey 2 are set to
Line 1 and Line 2 in the WebUI.
You can set a softkey to act as a line/call appearance key on the 6930.
Mitel Web UI Configuration
Corresponding 6930 Display
Configuring Softkeys
lxxxvii