Configuring A Outgoing Redial Key Using The Mitel Web Ui; Conference Key - Mitel 6930 User Manual

Mitel 6930 SIP Phone User Guide

Configuring a Outgoing Redial Key Using the Mitel Web UI

1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 44 on the Top keys.
or
Select from Key 1 through Key 24 on the Bottom keys.
3. In the Type field, select Redial.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84 (M695).
7. In the Type field, select Redial.
8. Click Save Settings.

Conference Key

Using the Mitel Web UI, you can assign a Conference key to any key on the top or bottom keys on
the phone.
Note: For more information about conferencing, see
cxvi
"Conferencing Calls" on page cxliii.