Outgoing Redial Key - Mitel 6930 User Manual

Softkeys
2. Select from Key 1 through Key 44 on the Top keys.
or
Select from Key 1 through Key 24 on the Bottom keys.
3. In the Type field, select Callers List.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84 (M695).
7. In the Type field, select Callers List.
8. Click Save Settings.

Outgoing Redial Key

By default, the 6930 has a dedicated Outgoing Redial key. However, using the Mitel Web UI, you
can assign the Outgoing Redial key to any key on the top or bottom keys on the phone.
The Outgoing Redial List is a stored log of your outgoing calls. You can use the Outgoing Redial
key to access a list of the most recent calls you placed.
Note: For more information about the Outgoing Redial List, see
on page cxxx.
Configuring Softkeys
Outgoing
Redial Key
"Outgoing Redial List"
cxv