Din Track Mounting - Omron SYSMAC CS Series Operation Manual

Installation
5-2-6

DIN Track Mounting

DIN Track Mounting Bracket
298
4. To remove a Group-A Unit, use a phillips-head screwdriver to loosen the
screw at the bottom of the Unit, rotate the Unit upward, and remove it.
To remove a Group-B Unit, hold down the lock lever with a tool such as a
screwdriver, rotate the Unit upward, and remove it.
Do not use DIN Track to mount Backplane in locations subject to vibration;
use locking screws to attach the Backplane directly.
Mount the DIN Track in the control panel with M4 screws in at least three
places. Tighten the mounting screws to a torque of 1.2 N·m.
Use DIN Track Mounting Brackets to mount Racks to the DIN Track.
Lock lever
C200H-DIN01
Mounting Bracket
DIN Track
Section 5-2