Omron SYSMAC CS Series Operation Manual page 720

Specifications of Basic I/O Units and High-density I/O Units
Circuit Configuration
Note 1. The ERR indicator will light if a fuse blows or if the external power supply is turned OFF, and the cor-
responding Flag in the Basic I/O Unit Information Area (A050 to A089) will turn ON.
2. The ON response time will be 120 µs maximum and OFF response time will be 300 µs maximum even
if the response times are set to 0 ms due to internal element delays.
682
Note The input ON and OFF response times for Basic I/O Units can be set to
0 ms, 0.5 ms, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, or 32 ms in the PLC
Setup.
Indicator
switch circuit
Output indicator
Blown fuse
detection
ERR indicator
circuit
1000 pF
560 Ω
Fuse
x 3 CN1 (Output)
4.7 kΩ
x 3 CN2 (Input)
Appendix A