Mounting To Din Track - Omron CK3M Series User Manual

4 Installation
CPU Rack
Power Supply
Unit
Expansion
Rack
Power Supply
Unit
Precautions for Correct Use
• Always turn OFF the power supply before connecting Units to each other.
• During maintenance, always turn OFF the power supply to the entire system before replacing
a Unit.
• You can connect up to four CK3W Units (or up to two CK3W-AX Units) to each of the CPU
Rack and Expansion Rack. If you connect more than that number, the Sys.CK3WConfigErr
Flag goes ON.
Operation will continue even with the Sys.CK3WConfigErr Flag ON.
4-3-3

Mounting to DIN Track

Use the following procedure to install a CK3M-series Controller on DIN Track.
1
Release the DIN Track mounting pins on the backs of the Units.
DIN Track
mounting pins
2
To mount, hook on the DIN Track from above (1), and insert into the back (2).
4-10
CPU Unit Expansion
Master Unit
Expansion cable
Expansion
Slave Unit
Release
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)
Configuration Units
(4 max.)
Configuration Units
(4 max.) (included with Expansion Slave Unit)
End Cover
(included with CPU Unit)
End Cover