Ftp Server Configuration Example In Irf Mode - HP FlexFabric 7900 Series Configuration Manual

ftp> put temp.bin
# Exit FTP.
ftp> bye

FTP server configuration example in IRF mode

Network requirements
As shown in
master. The global standby MPU is in slot 0 of the subordinate member.
On the device, create a local user account with the username abc and password 123456 and enable the
FTP server function.
From the PC, use the user account to log in to the FTP server and do the following:
Upload the file temp.bin from the FTP client to the FTP server.
•
• Download the configuration file config.cfg from the FTP server to the FTP client for backup.
Figure 24 Network diagram
FTP client
1.2.1.1/16
PC
Configuration procedure
1. Configure IP addresses as shown in
each other. (Details not shown.)
2. Configure the FTP server:
# Examine the storage space on the member devices. If the free space is insufficient, use the
delete/unreserved file-url command to delete unused files. (Details not shown.)
# Create local user account abc and set the password to 123456.
<Sysname> system-view
[Sysname] local-user abc class manage
[Sysname-luser-manage-abc] password simple 123456
# Assign the user role network-admin to the user and set the working directory to the Flash root
directory of the global active MPU. To set the working directory to the Flash root directory of the
global standby MPU, replace flash:/ in the authorization-attribute command with
chassis2#slot0#flash:/.
[Sysname-luser-manage-abc] authorization-attribute user-role network-admin
work-directory flash:/
# Assign the service type FTP to the user.
[Sysname-luser-manage-abc] service-type ftp
[Sysname-luser-manage-abc] quit
Figure 24, a two-chassis IRF fabric has two MPUs. The global active MPU is in slot 0 of the
Internet
IRF (FTP server)
IP: 1.1.1.1/16
Master
(Member_ID=1)
Note: The orange line represents an IRF connection.
Figure 24, and make sure the IRF fabric and the PC can reach
68
Subordinate
(Member_ID=2)