HP FlexFabric 7900 Series Configuration Manual page 33

Task
(Optional.)
(Optional.)
(Optional.)
The Telnet login configuration is effective only for users who log in after the configuration is completed.
Disabling authentication for Telnet login
Step
1. Enter system view.
2. Enable Telnet server.
3. Enter VTY line view or
class view.
4. Disable authentication.
5. (Optional.) Assign a user
role.
The next time you attempt to Telnet to the device, you do not need to provide any username or password,
as shown in
and the message "All user lines are used, please try later!" appears.
Setting the maximum number of concurrent Telnet users
Setting the DSCP value for outgoing Telnet packets
Configuring common VTY line settings
Command
system-view
telnet server enable
•
•
authentication-mode none
user-role role-name
Figure 9. If the maximum number of login users has been reached, your login attempt fails
To enter VTY line view:
line vty first-number
[ last-number ]
To enter VTY line class
view:
line class vty
26
Remarks
N/A
N/A
N/A
Remarks
N/A
By default, the Telnet server function is
disabled.
Use either command.
A setting in user line view is applied only to
the user line. A setting in user line class
view is applied to all user lines of the class.
A non-default setting in either view takes
precedence over a default setting in the
other view. A non-default setting in user line
view takes precedence over a non-default
setting in user line class view.
A setting in user line view takes effect
immediately and affects the online user. A
setting in user line class view does not
affect online users and takes effect only for
users who log in after the configuration is
completed.
By default, password authentication is
enabled for VTY lines.
In VTY line view, this command is
associated with the protocol inbound
command. If you specify a non-default
value for only one of the two commands in
VTY line view, the other command uses the
default setting, regardless of the setting in
VTY line class view.
By default, a VTY line user is assigned the
user role network-operator.