HP FlexFabric 7900 Series Configuration Manual page 111

Figure 32 Network diagram
Master Subordinate
(Member ID = 1) (Member ID = 2)
IRF link
Internet
IRF
1.1.1.1/24
2.2.2.2/24
TFTP server
Configuration procedure
# Configure IP addresses and routes. Make sure the device and the TFTP server can reach each other.
(Details not shown.)
# Complete TFTP settings on both the device and the TFTP server. (Details not shown.)
# Display information about the current software images.
<Sysname> display version
# Use TFTP to download the image file 7904.ipe from the TFTP server to the root directory of the flash on
the global active MPU.
<Sysname> tftp 2.2.2.2 get 7904.ipe
# (Optional.) Back up the image file to 7904-backup.ipe on the global active MPU. Skip this step if the
flash does not have sufficient space.
<Sysname> copy 7904.ipe 7904-backup.ipe
# Specify 7904.ipe as the main startup image file for all MPUs.
<Sysname> boot-loader file flash:/7904.ipe chassis 1 slot 0 main
<Sysname> boot-loader file flash:/7904.ipe chassis 2 slot 0 main
# Specify 7904-backup.ipe as the backup startup image file for all MPUs.
<Sysname> boot-loader file flash:/7904-backup.ipe chassis 1 slot 0 backup
<Sysname> boot-loader file flash:/7904-backup.ipe chassis 2 slot 0 backup
# Verify the startup image settings.
<Sysname> display boot-loader
# Reboot the IRF fabric to complete the upgrade.
<Sysname> reboot
# Verify that the IRF fabric is running the correct software.
<Sysname> display version
104