Setting The Operation Mode For Files And Folders - HP FlexFabric 7900 Series Configuration Manual

Configuration procedure
Perform this task in user view.
Task
Partition a storage medium.

Setting the operation mode for files and folders

The device supports the following file and folder operation modes:
alert—The system prompts for confirmation when your operation might cause problems such as file
•
corruption and data loss. This mode provides an opportunity to cancel a disruptive operation.
• quiet—The system does not prompt for confirmation.
To set the operation mode for files and folders:
Step
1. Enter system view.
2. Set the operation mode for
files and folders.
Command
fdisk medium-name
[ partition-number ]
Command
system-view
file prompt { alert | quiet }
86
Remarks
By default, only one partition usb0:/ is
available on a USB disk.
Remarks
N/A
The default mode is alert.