HP FlexFabric 7900 Series Configuration Manual page 37

Setting the DSCP value for outgoing Telnet packets
The DSCP value is carried in the ToS/Traffic class field of an IP packet, and it indicates the transmission
priority of the packet.
To set the DSCP value for outgoing Telnet packets:
Step
1. Enter system view.
2. Set the DSCP value for
outgoing Telnet
packets.
Configuring common VTY line settings
For a VTY line, you can specify a command that is to be automatically executed when a user logs in.
After executing the specified command and performing the incurred task, the system automatically
disconnects the Telnet session. Before you configure this function and save the configuration, make sure
you can access the CLI through a different user line.
Typically, you configure the auto-execute command telnet X.X.X.X command on the device so the device
redirects a Telnet user to the host at X.X.X.X. In this case, the connection to the current device is closed
when the user terminates the Telnet connection to X.X.X.X.
To configure common settings for VTY lines:
Step
1. Enter system view.
2. Enter VTY line view or
class view.
3. Enable the terminal
service.
Command
system-view
telnet server dscp dscp-value
Command
system-view
•
To enter VTY line view:
line vty first-number
[ last-number ]
•
To enter VTY line class
view:
line class vty
shell
30
Remarks
N/A
By default, the DSCP value is 48.
Remarks
N/A
Use either command.
A setting in user line view is applied only to the
user line. A setting in user line class view is
applied to all user lines of the class.
A non-default setting in either view takes
precedence over a default setting in the other
view. A non-default setting in user line view takes
precedence over a non-default setting in user line
class view.
A setting in user line view takes effect
immediately and affects the online user. A setting
in user line class view does not affect online
users and takes effect only for users who log in
after the configuration is completed.
By default, terminal service is enabled.