Configuration Procedure; Rebooting The Device - HP FlexFabric 7900 Series Configuration Manual

<System> system-view
[System] header shell A
Please input banner content, and quit with the character 'A'.
Have a nice day.
Please input the password.A
Method 3—After you type the last command keyword, type the start delimiter and part of the
banner and press Enter. At the system prompt, enter the rest of the banner and end the last line
with the same delimiter. For example, you can configure the banner "Have a nice day. Please
input the password." as follows:
<System> system-view
[System] header shell AHave a nice day.
Please input banner content, and quit with the character 'A'.
Please input the password.
A

Configuration procedure

To configure banners:
Step
1. Enter system view.
2. Configure the legal banner.
3. Configure the MOTD banner.
4. Configure the login banner.
5. Configure the shell banner.

Rebooting the device

CAUTION:
• A reboot can interrupt network services.
To avoid configuration loss, use the save command to save the running configuration before a reboot.
•
For more information about the save command, see
Before a reboot, use the display startup and display boot-loader commands to verify that you have
•
correctly specified the startup configuration file and startup software images. If the main startup
software images are corrupted or missing, you must re-specify a set of main startup software images
before using the reboot command to reboot the device. Otherwise, the device cannot start up. For more
information about the two display commands, see
The following device reboot methods are available:
Immediately reboot the device at the CLI.
•
Command
system-view
header legal text
header motd text
header login text
header shell text
Fundamentals Command Reference
Fundamentals Command Reference
108
Remarks
By default, no banner is
configured.
By default, no banner is
configured.
By default, no banner is
configured.
By default, no banner is
configured.
By default, no banner is
configured.
.
.