Ftp Commands; List Of Ftp Commands - Mitsubishi MELSEC L Series User Manual

8.4

FTP Commands

8.4.1

List of FTP commands

Command
*5
Notifies the FTP server of file transfer without conversion.
binary
Disconnects the line to the FTP server and terminates the
bye
session.
close Disconnects the line to the FTP server.
delete
Deletes a file in the CPU module.
dir
Displays file information of the CPU module.
get
Reads a file from the CPU module.
ls
Displays file names of the files stored in the CPU module.
mdelete
Deletes file(s) stored in the CPU module.
mdir
Stores file information of the CPU module into a file.
mget
Reads file(s) from the CPU module.
mls
Stores CPU module's file names into a file.
mput Writes file(s) to the CPU module.
open Connects to the FTP server.
put Writes a file to the CPU module.
pwd Displays the current directory of the CPU module.
Disconnects the line to the FTP server and terimnates the
quit
connection.
quote
Sends an FTP server subcommand.
rename
Changes a CPU module file name.
user Inputs the user name and password of the CPU module.
*1 Whether the online change settings is enabled or not is indicated in the "Built-in Ethernet Port" tab in the PLC Parameter
dialog box.
*2 These indicate whether the remote password can be used or not when the FTP communication port is specified as a
remote password check target in the remote password setting. For remote passwords, refer to:
CHAPTER 9
*3 On the next page, subcommands available with the "quote" command are shown.
*4 Each of these commands can include a folder name in the file specification.
*5 This command is set automatically in the CPU module. Therefore, a file transfer is coded in binary regardless of the
"Communication Data Code" of the "Built-in Ethernet Port Setting" in PLC Parameter.
94
Function
*4
*4
*4
*4
*4
*4
*4
*4
*3
*4
CPU module state
RUN
Write Write
STOP
enabled disabled
*1 *1
×
×
×
×
×
: Available, × : N/A
Remote password
Unlocked Locked
*2 *2
×
×
×
×
×
×
×
×
×
×
×
×
×
Page 107,