Mitsubishi MELSEC L Series User Manual page 93

(a) Logging in to the CPU module
The following explains the operation flow from starting an FTP session until log-in to the CPU module.
Ex. Start up the FTP from the MS-DOS prompt of Microsoft
1.
2.
3.
4.
1.
Start an FTP session. (FTP <ret>)
2.
Open a connection to the FTP server (open "IP address of the CPU module" <ret>)
3.
Specify the login name (Login name <ret>)
4.
Specify the password (Password <ret>)
(b) Locking and unlocking a remote password
If the FTP communication port is specified as a remote password check target in the remote password settings,
unlock the remote password using the following command.
(quote password-unlock "Remote password" <ret>)
When terminating the operation, lock the unlocked remote password using the following command.
(quote password-lock <ret>)
If the FTP communication port is specified as a remote password check target, any other commands cannot be used until
the remote password is unlocked.
(c) Entering file password 32
When file password 32 (write or read password) is set for the target file, the password must be entered with the
following command before accessing the file.
• Write password (quote passwd-wr "write password" <ret>)
• Read password (quote passwd-rd "read password" <ret>)
CHAPTER 8 FILE TRANSFER FUNCTION (FTP)
Windows .
8
91