Setting For The Cpu Module - Mitsubishi MELSEC L Series User Manual

3.1

Setting for the CPU Module

(1) PLC parameter setting
Select the "Built-in Ethernet Port Setting" tab and set the parameters.
Project window
1.
1.
Set the IP address of the CPU module.
2.
Set MELSOFT connection.
Project window
Item
Protocol
Open System
[Parameter]
[Parameter]
[Open Setting]
Select "TCP" or "UDP" depending on the connected device.
Select "MELSOFT Connection."
CHAPTER 3 CONNECTION OF PROGRAMMING TOOLS AND GOT
[PLC Parameter] [Built-in Ethernet Port Setting]
[PLC Parameter] [Built-in Ethernet Port Setting]
Setting
2.
21
3