Setting Method - Mitsubishi MELSEC L Series User Manual

7.1

Setting Method

Configure the time settings in the Built-in Ethernet port tab of the PLC parameter dialog box.
Project window
Item
SNTP Function Setting
SNTP Server IP Address
Time Zone
Execute time setting at turn ON/
reset
At Error Occurrence
*2
Execution Interval
*2
Execution Time
*2 Either of these two options must be selected.
86
[Parameter]
[Time Setting]
Select whether to use this function or not.
Specify the IP address of the SNTP server.
Specify a time zone in which the time is to be synchronized. Japan
Standard Time "GMT+9:00".is set by default.
Select whether to execute the time setting function upon power-on or reset
of the CPU module.
Select whether to stop or continue the time setting when an error is
detected upon power-on or reset of the CPU module.
Select this when executing the time setting function at fixed time intervals.
Select this when executing the time setting function at a specified time. (in
increments of 30 minutes)
[PLC Parameter] [Built-in Ethernet Port Setting]
Description Setting range
Used or Not used
0.0.0.1 to
223.255.255.254
(GMT-12:00 to
GMT+13:00)
-
Continue or Stop
1 to 1440 (min.)
00:00 to 23:30