Mitsubishi MELSEC L Series User Manual page 106

passwd-wr
●
[Function]
[Specification format]
[Example 1]
[Example 2]
[Example 3]
[Note]
104
Sets, displays, and clears the write password (file password 32) that is registered to the file
transfer target.
With this command, the CPU module checks the write password when access is made to
the transfer target file.
quote passwd-wr [write password]
Any of the following is displayed as an execution result upon completion.
• When setting a write password: 200 Command successful
• When displaying a write password: 200 Write-password is [write password]
• When clearing a write password: 200 Command successful
• When attempting to display a write password with no write password set:
200 Write-password is not set.
When setting a write password (1234@ABCDefgh):
quote passwd-wr 1234@ABCDefgh
When displaying a write password that is currently set to FTP:
quote passwd-wr
When clearing a write password that is currently set to FTP:
quote passwd-wr c, or quote passwd-wr C
• One write password can be set to FTP of the CPU module.
When the transfer target file is changed, if a write password is preset for the new target
file, set the write password of the target file again.
• When the CPU module is logged in, the write password is cleared.