Mitsubishi MELSEC L Series User Manual page 15

Pages describing instructions are organized as shown below.
The following page illustrations are for explanation purpose only, and are different from the actual pages.
Instruction name
shows the devices
applicable to the instruction
Descriptions of
setting data and data type
Descriptions of
control data (if any)
Detailed descriptions
of the instruction
Conditions for the error and
error codes
For the errors not described in
this manual, refer to the following.
MELSEC-Q/L Programming
Manual (Common Instruction)
Simple program example(s)
and descriptions of the devices used
Execution condition of the instruction
Structure of the instruction
in the ladder mode
Setting side
User : Device value is set by the user.
System: Device value is set by
the CPU module.
13