Auto Clock Setting; Manual Clock Setting; Other Settings You Can Make - Pioneer DVR-532H-S Operating Instructions Manual

Getting started
04
•

Auto clock setting

Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Use the
channel preset number that broadcasts a time
signal, then move the cursor down to 'Start' and
press ENTER.
Initial Setup
Basic Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
The recorder takes a short while to set the time. After you
see that the time has been set, select Next to proceed.
If the time could not be set automatically, press RETURN
to go back to the previous screen and select Manual.
•

Manual clock setting

If no stations in your area are broadcasting time
signals, you can set the clock manually.
Use the
Initial Setup
Basic
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Press then use the
Summer Time to On or Off, then press ENTER.
Select On if you are currently using summer (daylight
saving) time.
Set the current date and time.
Initial Setup
Basic
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
• Use the
highlighted field.
• Use the
another.
• Press ENTER to finish setting the time.
26
En
buttons to set 'Clock Set CH' to the
Clock Setting Auto Clock Setting
Help
Date 1 1 / 17 / 2004 Wed
Setup Navigator Setup Navigator
Time 11 : 20 AM
Clock Set CH
2
Start
Next
buttons to set your time zone.
Clock Setting Manual Clock Setting
Help
USA
Time Zone
Setup Navigator Setup Navigator
Alaska
D.S.T Off
buttons to set
Clock Setting Manual Clock Setting
Help
01 / 01 / 2005 SAT
Date
Setup Navigator Setup Navigator
Time 00 : 00 AM
USA
Time Zone
Alaska
Off
D.S.T
buttons to change the value in the
buttons to move from one field to
7 Select the kind of TV you have, 'Wide (16:9)' or
'Standard (4:3)'.
Initial Setup
Basic Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Use the
8 Is your TV compatible with progressive scan
video?
Initial Setup
Basic
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Use the
Compatible, or Don't Know, then press ENTER.
• Note that progressive scan video is only output
through the component video outputs (see page 16).
9 Press ENTER to finish setting up, or select 'Go
1/2
Back' if you want to start again.
Initial Setup
Basic
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
That completes basic setup using the Setup Navigator.

Other settings you can make

After setting up using the Setup Navigator, you should be
2/2
ready to start enjoying your DVD recorder. It's possible,
however, that you may want to make a couple of
additional settings, depending on how the recorder is set
up for TV broadcasts.
• Manual channel setting – This setting lets you skip
channels where there is no station, as well as
manually tune to stations. See Manual CH Setting on
page 92.
• Setting up the remote to control your TV – You can set
up the supplied remote control to control many
brands of TV. See Setting up the remote to control your
TV on page 98.
Clock Setting TV Screen Size
Help
Setup Navigator Setup Navigator Wide(16:9)
Standard(4:3)
buttons to select, then press ENTER.
Clock Setting Progressive
Help
Setup Navigator Setup Navigator Compatible
Not Compatible Not Compatible
Don't Know
buttons to select Compatible, Not
Clock Setting
Help Set up is complet e!
Setup Navigator Setup Navigator Enjoy using your DVD recorder !
Finish Set up Finish S et up
Go B ack