Pioneer DVR-65H-S Service Manual
Pioneer DVR-65H-S Service Manual

Pioneer DVR-65H-S Service Manual

Dvd recorder
Hide thumbs Also See for DVR-65H-S:

Advertisement

DVD RECORDER

DVR-520H-S
DVR-65H-S
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
DVR-520H-S
KU/CA
DVR-520H-S
KUXU/CA
DVR-65H-S
KCXU
÷
When servicing this model, some service procedures may reset the settings that customer
set (*) to the factory default settings. Make sure to explain this to the customer.
(*) : Initial Setup (Clock Setting, Remote Control Set, Channel settings, Video Out settings,
Audio In settings, Audio Out settings, Language settings)
Refer to the chapter 13 of the Operating Instructions for more details.
An HDD (Hard Disc Drive) is mounted in this product.
The HDD is a precision instrument very vulnerable to shock and electrostatic charges.
Please read "7.4 Cautions on Handling the HDD" in this manual and exercise sufficient caution
when handling the HDD itself, as well as the product with the HDD built in.
When an HDD becomes defective and inoperable, restoration of the user's data recorded on
the HDD, or copying of the user's recorded data to other media (such as a new HDD) is totally
impossible. Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.
The user must be made aware that all recorded data are deleted if the HDD is intialized.
For details, refer to "Important symbols for good services" .
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
STANDBY/ON
PULL-OPEN
Power Requirement
AC120V
AC120V
AC120V
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
HDD
DVD
OPEN/CLOSE
REC ONE TOUCH COPY
DVR-520H-S
Region No.
1
1
1
ORDER NO.
RRV2963
DV IN/OUT
Serial No.
Please confirm 3rd & 4th
alphabetical letters.
&&PG######$$
&&PG######$$
T-ZZV MAY 2004 printed in Japan

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer DVR-65H-S

  • Page 1: Dvd Recorder

    PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936...
  • Page 2: Safety Information

    For the latest information, always consult the current PIONEER Service Manual. A subscription to, or additional copies Also test with plug reversed of, PIONEER Service Manual may be obtained at a (Using AC adapter Earth nominal charge from PIONEER. plug as required)
  • Page 3 IMPORTANT THIS PIONEER APPARATUS CONTAINS WARNING! LASER OF CLASS 1. DEVICE INCLUDES LASER DIODE WHICH SERVICING OPERATION OF THE APPARATUS EMITS INVISIBLE INFRARED RADIATION SHOULD BE DONE BY A SPECIALLY WHICH IS DANGEROUS TO EYES. THERE IS INSTRUCTED PERSON. A WARNING SIGN ACCORDING TO PICTURE...
  • Page 4 [ Important symbols for good services ] In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill them: 1. Product safety You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.
  • Page 5: Table Of Contents

    CONTENTS SAFETY INFORMATION............................2 1. SPECIFICATIONS .............................6 2. EXPLODED VIEWS AND PARTS LIST......................8 2.1 PACKING ..............................8 2.2 EXTERIOR ...............................10 2.3 FRONT PANEL ............................13 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ..................16 3.1.1 OVERALL BLOCK DIAGRAM .......................16 3.1.2 TUNB and JCKB ASSY BLOCK DIAGRAM ..................18 3.1.3 MAIN ASSY BLOCK DIAGRAM ......................20 3.1.4 POWER BLOCK DIAGRAM ........................22 3.2 OVERALL WIRING DIAGRAM .........................24...
  • Page 6: Specifications

    1. SPECIFICATIONS General Timer System ....HDD, DVD-Video, DVD-R/RW, Programs ..... . 1 month/32 programs Video-CD, CD, Clock.
  • Page 7 • Power cable ×1 INPUT SELECT PQRS WXYZ (ADG7021 : DVR-520H-S/KU/CA) CHANNEL VCR Plus+ CLEAR CLEAR (ADG7075 : DVR-520H-S/KUXU/CA DISC NAVIGATOR PLAY LIST DVR-65H-S/KCXU) OP MENU MENU ENTER HOME MENU RETURN REV SCAN PLAY FWD SCAN PAUSE STOP BACK SKIP...
  • Page 8: Exploded Views And Parts List

    2. EXPLODED VIEWS AND PARTS LIST NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
  • Page 9 See Contrast table (2) Packing Case See Contrast table (2) (French) (2) CONTRAST TABLE DVR-520H-S/KU/CA, KUXU/CA and DVR-65H/KCXU are constructed the same except for the following : DVR-520H-S DVR-520H-S DVR-65H-S Mark No. Symbol and Description /KU/CA /KUXU/CA /KCXU > 1 Power Cable...
  • Page 10: Exterior

    2.2 EXTERIOR Lithium Battery (CR2032) (65H type) Refer to (520H type) "2.3 FRONT PANEL SECTION". DVR-520H-S...
  • Page 11 Spacer VEC2413 NSP 33 Clamp VEC2418 (2) CONTRAST TABLE DVR-520H-S/KU/CA, KUXU/CA and DVR-65H/KCXU are constructed the same except for the following : DVR-520H-S DVR-520H-S DVR-65H-S Mark No. Symbol and Description /KU/CA /KUXU/CA /KCXU 10 HDD 80G 4R080L0 SV VXF1010 VXF1010...
  • Page 12 DVR-520H-S DVR-520H-S DVR-65H-S Mark No. Symbol and Description /KU/CA /KUXU/CA /KCXU 24 Housing Assy (4P) VKP2348 VKP2335 VKP2335 49 HDD Badge VAM1141 VAM1141 Not used 50 Tray Sheet B VEC2409 VEC2409 Not used 50 Tray Sheet Not used Not used...
  • Page 13: Front Panel

    2.3 FRONT PANEL 9(2/2) (Note) 9(1/2) [DVR-520H type] Note : When replacing the jack door, first fully open it. If the jack door is not fully open during replacement, it may unexpectedly fall out after being replaced. 9(2/2) (Note) 9(1/2) [DVR-65H type] DVR-520H-S...
  • Page 14 3 Flexible Cable (19P) VDA2016 VDA2002 VDA2002 4 Flexible Cable (7P) VDA2019 VDA2005 VDA2005 5 Front Panel Assy VXA2645 VXA2645 VXA2649 6 Pioneer Name Plate VAM1146 VAM1146 VAM1147 9 Main Key VNK5420 VNK5420 VNK5436 11 Sub Panel VNK5483 VNK5483 VNK5526...
  • Page 15 DVR-520H-S...
  • Page 16: Block Diagram And Schematic Diagram

    3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 3.1 BLOCK DIAGRAM 3.1.1 OVERALL BLOCK DIAGRAM : Playback system signal route : Recording system signal route U301 VXF1022 TUNB Video Selector TV FRONT-END Video Driver ASSY RF IN IC701 AOUT VOUT LA73033(1/2) CN401 CN301 (19P) (19P)
  • Page 17: Flky Assy

    • R ch is same as L ch. DVJB ASSY DV TERMINAL JA1401 CN1401 (7P) 1,3 2 CN701(1/2) CN5102 1,3 2 (7P) (32P) IC5204 SEL.V/Y DV SDRAM 16Mbit SEL.C IC202 IC203 38 39 37 36 PEG034A IC204 RS5C372A BR24L32F-W Real Tuner IC5202 IC5101...
  • Page 18: Tunb And Jckb Assy Block Diagram

    3.1.2 TUNB and JCKB ASSY BLOCK DIAGRAM CN301 CN401 Q306 TUON +32V JCKB ASSY (VWV2028) Reg. Ripple Filter U301 V/U Tuner FrontEnd TUON<u-com> Audio VXF 1022- MUTE <u-com> STID Video Input Circuit <u-com> STID <u-com> SUID SUID UV_L <IC601> MUTE UV_R IC451 MPX Audio...
  • Page 19 IC1001 V1001 FL Driver FLCK, FLDATA, FLSTB FL Display PT6315 <CN401 Pin7> EVOLCLK <IC601> EVOLDATA FLKY ASSY EVOLCE IC202 (VWG2489) SDET1 <JA1301, S1001-S1009 SDET2 Tuner/FL S1201-S1203 JA601> SDET3 KEY1, KEY2, KEY3 Control U-com Front Keys <Q514> SYNCAFT PEG034A-K KIRB IC1201 <IC701>...
  • Page 20: Main Assy Block Diagram

    3.1.3 MAIN ASSY BLOCK DIAGRAM MAIN ASSY (VWV2025) AUDIO LR OUT IC3251 IC3201 IC3101 AUDIO LR IN AK5357VT PCM1742KE To JCKB ASSY Q2101-Q2105 VIDEO Y,C,Yp,Cb,Cr OUT VIDEO Y,C IN IC2301 AGC,ACC D.OUT CD D.OUT TO TUNER u-COM To JCKB ASSY ECLK0 IC1301 IC1001...
  • Page 21 VSS1195 X4102 VCXO Input Mster IC4101 clock 33/36M IC3402 SM8707KV PLL IC SRC**I SRC**O AMCLK1 AMCLK2 VMCLKI IC4205 TC7WHU04FU Play Mster clock IC4206 DVVCLKO IC5341 HCLK0 VCLKI IC5202 HOST BUS UPD72893BGD-LML UPD72852AGB-8EU LINK/DV CODEC MCLK SCLK IC1101 IC5204 IC5101 CPU SDRAM DV SDRAM K4S281632E-TC75 K4S161622D-TC80...
  • Page 22: Power Block Diagram

    3.1.4 POWER BLOCK DIAGRAM MAIN ASSY IC4004 V+5A 5V REG. IC4008 V+PRA IC4006 1.2V REG. V+5D 5V REG. V+2R5V CN4001 V+6V (8P) IC4007 V+3V SW+6V 3.3V REG. V+6V SW+2.5V SW+4V V+2R5V V+4V SW+4V IC4002 IC5002 V+3D V+2R5 SW+4V 3.3V REG. 2.5V REG.
  • Page 23 DVR-520H-S...
  • Page 24: Overall Wiring Diagram

    3.2 OVERALL WIRING DIAGRAM TUNB ASSY (VWV2010) ADG7075 1/2 - POWER JCKB ASSY (VWV2023) SUPPLY UNIT (VWR1380) ATHB ASSY (VWV2011) 1/5 - MAIN ASSY (VWV2025) DVJB ASSY (VWV2006) DVR-520H-S...
  • Page 25 ÷ When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". ÷ The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. ÷...
  • Page 26: Tunb Assy

    3.3 TUNB ASSY TUNB ASSY (VWV2010) DVR-520H-S...
  • Page 27 : Video Signal Route (TUNER) : Audio Signal Route (TUNER) : Audio Signal Route (L ch) CN401 CN402 DVR-520H-S...
  • Page 28: Jckb Assy(1/2)

    3.4 JCKB ASSY(1/2) JCKB ASSY (VWV2023) : Video Signal Route : Video Signal Route (Y) : Video Signal Route (C) : Audio Signal Route (L ch) DVR-520H-S...
  • Page 29 CN1001 PEG034B TUFL u-com EEPROM DVR-520H-S...
  • Page 30: Jckb(2/2), Atwb And Athb Assys

    3.5 JCKB(2/2), ATWB and ATHB ASSYS : Video Signal Route ATHB to DRIVE ASSY R7 to HDD : Video Signal Route (TUNER) ASSY(VWV2011) CN4401 CN11 CN13 CN12 CN14 : Video Signal Route (Y) : Video Signal Route (C) (Cb) ATWB : Video Signal Route (Cb) (Cr) ASSY...
  • Page 31: Jckb Assy

    CN3001 From DRIVE ASSY (R7R) CN2001 (Cb) (Cr) Video Selector & Video Driver JCKB ASSY (VWV2023) DVR-520H-S...
  • Page 32: Main Assy(1/5)

    3.6 MAIN ASSY(1/5) 2/5,4/5 M65673WG-A 2/5,4/5 DVR-520H-S...
  • Page 33 MAIN ASSY (VWV2025) FLASH ROM VYW2179 IC1104 TC7SZ126FU-TLB R1104 R1105 100 (S) 10k (S) Backup SRAM (AT) : ATA Data Signal Route : Audio Signal Route (DIGITAL) : Audio Signal Route (L ch) DVR-520H-S...
  • Page 34: Main Assy(2/5)

    3.7 MAIN ASSY(2/5) MAIN ASSY (VWV2025) DVR-520H-S...
  • Page 35 : Audio Signal Route (L ch) DVR-520H-S...
  • Page 36: Main Assy(3/5)

    3.8 MAIN ASSY(3/5) VKN1814 CN702 DVR-520H-S...
  • Page 37 MAIN ASSY (VWV2025) : Audio Signal Route (DIGITAL) : Audio Signal Route (L ch) AK5357VT-TBB DVR-520H-S...
  • Page 38: Main Assy(4/5)

    3.9 MAIN ASSY(4/5) MM1603DP MAIN ASSY (VWV2025) 1/5, 2/5 1/5, 2/5 DVR-520H-S...
  • Page 39 (AT) : ATA Data Signal Route (AT) ATAPI BUS DVR-520H-S...
  • Page 40: Main Assy(5/5)

    3.10 MAIN ASSY(5/5) MAIN ASSY (VWV2025) IC5101 UPD72852AGB-8EU-A IC5101 CN1401 DVR-520H-S...
  • Page 41 IC5202 UPD72893BGD-LML IC5204 K4S161622D-TC80 DVR-520H-S...
  • Page 42: Flky, Kirb, Frjb And Dvjb Assys

    3.11 FLKY, KIRB, FRJB and DVJB ASSYS FLKY ASSY (VWG2489) DVR-520H-S...
  • Page 43 : Video Signal Route : Video Signal Route (C) : Audio Signal Route (L ch) : Video Signal Route (Y) KIRB ASSY (VWG2493) SWITCHES S1201 : STANDBY/ON S1202 : DISC HISTORY S1203 : DISC NAVIGATOR SWITCHES S1001 : 0 OPEN/CLOSE S1002 : &...
  • Page 44: Power Supply Unit

    3.12 POWER SUPPLY UNIT POWER SUPPLY UNIT (VWR1380) Not used Not used Not used Not used Not used Not used Not used Not used DVR-520H-S...
  • Page 45 Note : No individual parts replacement for repair is accepted by Model Supplier due to the safety reasons. Replace whole ASSY. Not used Not used Not used Not used Not used Not used DVR-520H-S...
  • Page 46: Wave Forms

    3.13 WAVE FORMS Note : The encircled numbers denote measuring point in the schematic diagram. JCKB ASSY IC601-pin 11 (L4) CN701-pin 27 (CMtoT) JA702-pin 4 (COUT) CN701-pin 23 (CBBMtoT) (Function : Tuner 2 ch) (Function : DVD play) (Function : DVD play) (Function : DVD play) V: 1V/div.
  • Page 47 MAIN ASSY Measurement condition ; No.3 to No.8, No.10 to No.13 : 75% Color-bar, A1 disc 2-20 No.15 ,No.16 : 75% Color-bar No.9, No.14 : 1kHz, 2Vrms, A1 disc 2-1 No.17 : 1kHz, 2Vrms X4102 - pin 4 (ADMCLKI) Q2105 - B (Cr) CN2001-pin 29 (Y Out) CN2001-pin 7 (SEL C) V: 1V/div.
  • Page 48 DVR-520H-S...
  • Page 49: Pcb Connection Diagram

    4. PCB CONNECTION DIAGRAM NOTE FOR PCB DIAGRAMS : 1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for diagrams. several destinations. 2. A comparison between the main parts of PCB and schematic For further information for respective destinations, be sure to diagrams is shown below.
  • Page 50: Tunb Assy

    4.1 TUNB ASSY SIDE A SIDE A TUNB ASSY Q306 R315 C316 C319 V+5TU Q301 Q301 C309 D302 C303 Q302 R324 Q304 R312 Q304 C326 C327 C451 C453 R453 R454 C459 R455 C458 R463 C460 Q451 C474 R471 C472 R468 C473 R467 R466...
  • Page 51 SIDE B SIDE B TUNB ASSY R308 R319 R309 R313 C314 Q303 C322 Q303 C323 R303 R320 C310 R302 C324 R321 C307 ADRS L304 R310 C308 C320 C321 Q307 L305 C311 MB(+5V) BP(+5V) R314 Q305 C312 C325 BT(+33V) Q305 R322 R323 TUON AUDIO...
  • Page 52: Jckb, Atwb And Athb Assys

    4.2 JCKB, ATWB and ATHB ASSYS SIDE A JCKB ASSY JA651 JA201 VNP1961-A C651 JCKB JA601 IC651 Q708 BT201 BT202 R651 MODIFED TEXT R179 Q711 R176 C176 Q173 Q173 Q172 R175 R174 Q172 C175 R185 R178 C177 CN105 R183 R320 L171 IC701 Q171...
  • Page 53 SIDE A R712 JA702 CN704 JA701 R808 L504 Q708 V+5VO R745 WARNING D705 D704 C724 D706 THIS PRODUCT CONTAINS LEAD IN SOLDER C750 C725 C726 AND CERTAIN ELECTRICAL PARTS CONTAIN CMKD-P3X C723 L505 R725 CHEMICALS WHITCH ARE KNOWN TO THE STATE C709 OF CALIFORNIA TO CAUSE CANCER,BIRTH C729...
  • Page 54 SIDE B JCKB ASSY Q507 R818 C767 C761 R713 C773 C772 C521 C763 C770 C765 C771 R529 C758 R734 R718 R717 R524 C764 D701 R525 C766 R746 R776 C520 R775 C768 R742 R741 R752 R530 R754 Q707 R750 R729 R528 Q509 VWV2015 VWV2027...
  • Page 55 SIDE B R655 Q507 C216 C772 C215 C770 C653 Q508 R211 R616 C661 R615 D607 R219 C244 D602 R742 C617 Q710 Q707 R729 IC205 IC205 C737 Q206 Q509 Q510 L284 R171 R284 Q206 Q203 R177 R727 Q709 Q706 C136 Q704 Q204 R182 VWV2035...
  • Page 56: Main Assy

    4.3 MAIN ASSY SIDE A MAIN ASSY C5121 C5124 L5502 D4002 C5122 F5101 TP4015 CN5102 CN1401 C4032 C4033 L5501 X5101 C5132 C5104 IC4007 L5103 R5125 R5126 C5103 L5104 C5127 L5101 IC4007 R5108 L5105 C5136 R5128 L5106 C5137 L5102 R5103 R5129 R5107 C5138 IC5101...
  • Page 57 SIDE A This PCB is six layer structure. R5251 R5249 R5252 R5247 C5124 L5502 L5504 TP32 TP38 TP31 C5207 C5104 R5231 C5103 C5127 R5232 R5233 C5216 R5214 R5216 TP5201 R5128 R5215 R5129 TP5202 R5217 R5234 C5126 R5235 C5215 R5236 R5272 C5125 R5130 IC5202...
  • Page 58 SIDE B MAIN ASSY R1306 R1305 IC1103 IC1104 L1301 IC1301 L1402 R4402 TP4401 TP4402 C1421 TP4406 C1422 TP4404 C1423 R5311 TP4403 C5341 TP4405 R5305 R5306 TP4408 C1424 TP4407 TP4409 R1310 R1309 TP4410 R5309 L5505 TP4411 IC5301 C1426 R5308 TP4413 TP4412 C1425 TP4415 R5312...
  • Page 59 SIDE B This PCB is six layer structure. R1306 R1304 R1303 R1305 TP25 TP26 TP27 IC1103 IC1104 TP24 TP21 TP23 TP22 IC1301 R1017 R1120 R1015 NIN15 TP1045 R1073 R1308 R1310 R1307 R1309 TP1044 TP1034 R1026 R1072 TP1049 R1078 R1079 C1009 C1007 R1002 C1008...
  • Page 60: Flky, Kirb, Frjb And Dvjb Assys

    4.4 FLKY, KIRB, FRJB and DVJB ASSYS SIDE A KIRB ASSY W1206 VWG2490 VWG2493 KIRB ASSY W1204 V+13SW V+5FL C1203 ACP-BS W1200 LED_HDD W1201 D1201 D1203 (HDD) (DVD) S1201 S1202 S1203 IC1201 CONTACT SIDE IC1201 CN1201 POWER DVD(H) HDD(H) DISC HISTRY(S) DISC NAVI(S) (VNP1962-C) FLKY ASSY...
  • Page 61 SIDE A FRJB ASSY CN705 CN1301 FRJB ASSY W1302 ACP-BS W1303 JA1301 W1301 JA1302 CN1301 Video S-Video VWV2004 W1300 S_DET KN1301 (VNP1962-C) FLKY ASSY W1027 W1021 FLPON DVJB ASSY CONTACT SIDE CN5102 S1007 S1008 CN1401 S1006 ONE TOUCH ONE TOUCH ACP-BS DUBBING DUBBING...
  • Page 62 SIDE B FRJB ASSY R1304 C1303 R1504 R1503 Video CONTACT SIDE S-Video S_DET (VNP1962-C) CN1301 FLKY ASSY Q1002 FLPON Q1002 Q1008 Q1001 DVJB ASSY IC1001 Q1001 Q1009 Q1007 Q1009 XTPB R1401 XTPB ACP-BS XTPA (VNP1962-C) DVR-520H-S...
  • Page 63 SIDE B KIRB ASSY C1206 KIRB ASSY VWG2490 C1205 R1210 VWG2493 C1202 V+13SW V+5FL R1212 R1211 VWG**** Q1201 (DVD) (HDD) C1207 C1204 R1213 LED_HDD R1208 Q1202 ACP-BS KEY1_2 POWER DVD(H) HDD(H) DISC NAVI(S) DISC HISTRY(S) (VNP1962-C) CN1001 LED_DVD FLDATA FLPON FLKY ASSY C1021 FLCLK...
  • Page 64: Power Supply Unit

    4.5 POWER SUPPLY UNIT SIDE A SIDE A POWER SUPPLY UNIT CN4001 to HDD R7 DRIVE ASSY CN104 DVR-520H-S...
  • Page 65: Pcb Parts List

    5. PCB PARTS LIST NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. When ordering resistors, first convert resistance values into code form as shown in the following examples.
  • Page 66 Mark No. Description Part No. Mark No. Description Part No. D103, D202 RB501V-40 R173 RS1/16S3901F R519, R526, R534 RS1/16S5600F D607 UDZS5.1B R602, R605, R606, R615-R617 RS1/16S75R0F COILS AND FILTERS R704, R715, R717, R718 RS1/16S75R0F R728-R730, R740, R743, R747 RS1/16S75R0F L503-L505 LAU100J R757-R759 RS1/16S75R0F...
  • Page 67 Mark No. Description Part No. Mark No. Description Part No. IC5202 UPD72893BGD-LML C1206, C1305, C1308, C1310, C1406 CKSRYB103K50 IC1102 VYW2176 C1425, C2305, C3003, C3004, C4018 CKSRYB103K50 IC1201 W986416DH-6 C4020, C4207, C5214, C5222, C5224 CKSRYB103K50 C1508-C1510, C2311, C4104, C5306 CKSRYB104K16 Q2101-Q2105, Q2201, Q2203, Q2301 2SA1576A C4103 CKSRYB223K50...
  • Page 68 Mark No. Description Part No. Mark No. Description Part No. RESISTORS R4013 RS1/16S1001F R1210 RS1/10S0R0J R3254, R3266 RS1/16S1002F R1206, R1207 RS1/10S182J R4012 RS1/16S1200F R1204 RS1/10S271J R3253, R3265 RS1/16S1201F Other Resistors RS1/16S###J R4011 RS1/16S1501F OTHERS R1021, R1023 RS1/16S2201F IC1201 REMOTE RECEIVER UNIT RPM7140-H9 R3251, R3269 RS1/16S2202F...
  • Page 69: Adjustment

    6. ADJUSTMENT 6.1 TUNB ASSY ADJUSTMENT * It is not necessary to adjust the ASSY normaly when exchanging the ASSY. But the adjustment is necessary when exchanging the Tuner Module and IC451 stereo decoder IC. Adjustment Name Adj. Point Measurement Point Adjustment Value Adjustment State Input a signal of Mono 1kHz/100% modulation Stereo Decoder ATT adjustment...
  • Page 70: Main Assy Adjustment

    6.2 MAIN ASSY ADJUSTMENT * It is not necessary to adjust the ASSY normaly when exchanging the ASSY, but confirm the data. Adjustment Name Adj. Point Measurement Point Adjustment Value Adjustment State MAIN ASSY Master clock free-running adjustment 27.000000MHZ No signal input IC3402 Pin8 (XTO) VC4201 ±...
  • Page 71: General Information

    7. GENERAL INFORMATION 7.1 DIAGNOSIS Service Diagnosis List 7.1.1 CPRM ID NUMBER AND DATA SETTING The Setting is necessary • " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode. •...
  • Page 72: Cprm Id Number And Data Setting

    7.1.1 CPRM ID NUMBER AND DATA SETTING Entering the ID Number and ID Data for DVD Recorder For the DVD recorder,it is necessary with the recoding/playback of DVD–RW disc to set an individual number (ID number) and ID data to each recorder.
  • Page 73 Input Flow of the ID No. and ID data when exchanging HDD, MAIN Assy or Drive Assy • When exchanging HDD or MAIN When exchanging Drive Assy When displayed "CPRM ERR" Assy, or both exchanged • When exchanging HDD Power → ON Also exchanging DRIVE Assy simultaneously When displayed following message at When displayed following message at...
  • Page 74 How to Input the ID Number and ID Data Note: Be sure to enter the ID number in Stop mode. Use the service remote control (GGF1381) for operations. Only opening/closing of the tray are performed from the player. The ID data disc is swept out automatically after the recorder has read the data from it. To enter the input mode, press ESC + STEREO sequentially in While the data are being read, the message shown in the figure a status with no ID number set, such as after FLASH-ROM...
  • Page 75 How to Confirm the ID Number Press ESC + STEREO sequentially with an ID number already set, and the unit enters the ID number confirmation mode. The set ID number is displayed on the screen (and on the FL display), permitting you to confirm it. To exit this mode, press CLEAR .
  • Page 76: Model Setting

    > -- Input No. Model : DVR-520H-S : DVR-65H-S 2) After 1), the following screen is displayed on TV monitor. Press " 011 " by using the remote control unit for service. [ Recorder 's Type Setting] Input the number by using the remote for Service.
  • Page 77: Download Method

    7.1.3 DOWNLOAD METHOD • The Download is Necessary When : a) After model setting b) When "NG" is displayed at First screen (version information, etc) [Notes] Be sure NOT to turn off the unit during downloading. If the unit is turned off during downloading, the SYSCON, TUFLCON, and DRIVE programs may not be properly rewritten, in which case the unit may not be able to initialize itself normally when turned on again.
  • Page 78 2. Serial DOWNLOAD METHOD [Notes] This method is secondary way when the disc loading is impossible. • JIGS * PC with serial port * RS232C straight cable * RS232C I/F jig (GGF1348) * 7P FFC (VDA1681) * Download program (UFU.exe) * Firmware •...
  • Page 79: Service Mode

    7.1.4 SERVICE MODE For service operations, use the GGF1381 remote control unit for service. The Service-mode screens consist of nine mode screens, which are classified into such rough categories as recording system and VR playback system, and their subscreens. • How to enter Service mode : Press the ESC then DISP keys in turn while no GUI is displayed. The first screen (version information, etc.) shown below is displayed.
  • Page 80 Table 1: HDD data indications according to various HDD connection statuses Example of HDD data HDD identification conditions Remarks to be displayed Failure in physical identification of HDD Blank space (no connection, defective HDD, interface error) Physical identification of HDD possible, but not identified WDC 10234564 # 80 "#"...
  • Page 81 • When "NG" is displayed at First screen (version information, etc) (*1) NG+ : Version of the tuner microcomputer too advanced NG- : Version of the tuner microcomputer too old 1. When TUFL µ-com is MASK type NG+ : Download the firmware. NG- : Replace the TUFL µ-com or JCKB ASSY.
  • Page 82 2. Second screen (ATA/ATAPI debug screen) Subscreen 1 of the second screen is displayed when the ESC, DISP, then "2" keys are pressed, in that order. Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4. •...
  • Page 83 • Subscreen 4: ATA/ATAPI DEBUG OSD_LD degradation judgment The degrees of degradation of the LD (laser diode) for the writer (LDs for CD and DVD separately), temperature, and RF level are displayed. To update the data on the subscreen, press the SEARCH key on the remote control unit for service while subscreen 4 is displayed.
  • Page 84 3. Fouth screen (VR-recording-related error log) Subscreen 1 of the fourth screen is displayed when the ESC, DISP, then "4" keys are pressed, in that order. Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 11. •...
  • Page 85 4. Fifth screen (Error log for VR playback) Subscreen 1 of the fifth screen is displayed when the ESC, DISP, then "5" keys are pressed, in that order. Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4. •...
  • Page 86 Table 1: Description of VR-playback-related errors - f i u l i h t l e l i o i t l b i l l e n i l l i a n i l u l i l a i o i t Abbreviations: STC = System Time Clock...
  • Page 87 Table 2: Description of VR-recording-related errors Error related to MPEG Encoder Error Message Description Stream NG Inappropriate input stream data Stm Start NG Failure to start encoding (reasons not clear) AVEnc Hang Inappropriate MPEG encoder No SysHdr IN System packet is not input periodically Timeout waiting for system packet input at the beginning Strm Start NG IN Encode *...
  • Page 88 Error related to Dubbing (continued) Error Message Description Strm TransfNG Video Mode Copy Stream Transfer NG VC FlushC NG Video Mode Copy Flush Cache NG VC Transf Stp Video Mode Copy Transfer Stop VC CopyCancel Video Mode Copy Copy Cancel Video Mode Copy idling NG VC Idling NG VC TSO BLK NG...
  • Page 89 Other Errors (continued) Error Message Description SW Vpb mode * Switching to video playback routine is required. SW Vrec mode * Switching to video recording routine is required. NV Pck MK Err Error in creating NaviPack Inappropriate NaviPack DMA NV Pck DMA Er Cell Close NG Cell Close NG Relocation Do...
  • Page 90 Table 3: List of Key Codes How to enter each check mode Test mode remote control unit : [A8**] Remote control unit supplied with the DVR : [AB**] Check Item Key Input Operation / purpose Remarks [ESC] → [A.MON] Turns on/off EE mode cyclically Make sure that CGMS = 11 becomes when EE system Starts the EE system in EE mode...
  • Page 91: Dv Debug Mode

    7.1.5 DV DEBUG MODE Press the ESC, DISP, then "3" keys, in that order. (DV/1394) Init:OK AV:01 DV:01 INT4:02 [Recoder] GUID:00E036000160001 IRM iPCR:C03F0000 oPCR:0000007A [DV] GUID:0080880303480E96 VN:VICTOR MN:GR-D50K TM:C3 TS:75 CT:32 WP:01 PS:FF OS:00 CA:A000002020 CV:FF MD:VTR [DVdecoder:Yes] TC:00h20m35s02f RD:02/02/05 RT:10h34m50s ASPECT:4:3 CGMS:000000 APSTB:00 DEC:525-60 SF:32kHz QU:12bit AMODE:4) Stereo...
  • Page 92 Item Description Remarks Stream time-code data are obtained when playback in Time-code data of the DVdecode Stream, or the forward direction is performed. Otherwise, time-code response data of the Time Code command data are obtained through an AV/C command. Rec Date of DVdecode Stream Rec Time of DVdecode Stream ASPECT Aspect Ratio of DVdecode Stream...
  • Page 93 DVR-520H-S...
  • Page 94: Error Rate Measurement

    7.1.6 ERROR RATE MEASUREMENT How to enter Error-Rate Measurement mode Press the ESC key then the SIDE-B key of the remote control unit for service to enter Error-Rate Measurement mode. During playback of DVD-VIDEO, Error-Rate Measurement mode can also be entered by pressing the ESC key then the PLAY key. How to exit Error-Rate Measurement mode Press the ESC key.
  • Page 95 ∗1 : Whether error-rate measurement is finished or not is judged, as shown in Table 3 below. Table 3: On judgment whether error-rate measurement is finished or not Judgment whether error-rate Recording/playback duration required Recording Mode measurement is finished or not for error-rate measurement The time required for completion of error-rate After playback of a certain amount (∗) of data...
  • Page 96: Video Adjustment For Specific Area

    7.1.7 VIDEO ADJUSTMENT FOR SPECIFIC AREA Purposes: Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO control section for adjusting signals received by the tuner can be used.
  • Page 97 Table 1: Key operations in Specific Channel Setting mode (effective only during recording/playback stop) Operation Setting (∗: Default) Remarks Switches cyclically between General DIG/ANA Setting mode and Specific Channel – – Setting mode. INPUT SELECT, CHANNEL +/– Switches inputs or channels. –...
  • Page 98 • Screen display when Specific Channel settings are made on 12 (maximum) channels: In such a case. If a channel which does not have specific settings is selected, the individual setting state for that channel is not displayed, as shown in the figure below, and the settings cannot be modified.
  • Page 99 Table 2: Key operations in General Setting mode (effective only during recording/playback stop) Operation Setting (∗: Default) Remarks INPUT SELECT, CHANNEL +/– Switches inputs or channels. – – (∗R) [SIDE A], [SIDE B] Sets Sync AGC. ON (∗) / OFF –...
  • Page 100: Aging Mode

    7.1.8 AGING MODE Notes: Commands from the remote control unit are accepted during Aging mode. If Aging mode is quit using the ESC key, indications on the FL display will return to normal display. Cancel timer settings before entering Aging mode. Set the recording rate beforehand.
  • Page 101 Table 2: Aging for the HDD Aging for the HDD Press the HDD key to switch to HDD. Press the ESC key then To enter the REP.B key on the remote control unit for servicing to enter Aging mode Aging mode. Press the ESC key on the remote control unit for servicing to quit Aging mode and return to Normal mode.
  • Page 102: Setup Sequence

    7.1.9 SETUP SEQUENCE System Codec IC (Inital Program Loader) Tuner/FL U-com DVD-R/RW Drive Connect power cord. System microcomputer starts up. Drive microcomputer starts up. Tuner/FL microcomputer starts up. Initialization of peripheral-circuit register, RAM, etc. LSI Check Initialization of peripheral-circuit register, RAM, etc. LSI NG displayed on FL display "POWER ON"...
  • Page 103: Disassembly

    7.1.10 DISASSEMBLY Note 1 : Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures described here are common. Note 2 : For performing the diagnosis shown below, the following jig cable for service is required: •...
  • Page 104 DRIVE Assy R7 (DVD-R/RW WRITER) MAIN Assy Remove the some jumper wires from the clamp. Remove the four screws. Disconnect the flexible cable. Remove the binder. Stand the MAIN Assy. Remove the some jumper wires from the SYPS cover. Remove the six screws. DVJB Assy CN5102 MAIN Assy.
  • Page 105 Diagnosis Connect the jig cable. Insert the insulation sheet between the MAIN Assy and base chassis. Arrange the unit as shown in the photo below. Caution : Main IC (IC1001) on the MAIN Assy generate heat to arround 80 degrees. Be careful when works.
  • Page 106: Cleaning The Pickup Lens

    Cleaning the pickup lens Remove the writer stay L by removing the three screws Remove the bottom cover by removing the four screws. with the bonnet angle and the SYPS cover. Bottom cover SYPS cover Bonnet angle Front side Writer stay L Remove the writer stay R by removing the three screws with the bonnet angle.
  • Page 107 Remove the four screws. Remove the clamper section. Clamper section Clean the pickup lens. Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools : Cleaning liquid : GEM1004 Cleaning paper : GED-008 Pickup lens DVR-520H-S...
  • Page 108 7.2 IC • The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams. List of IC PEG034B, RS5C372A, LC75342M, LA73033M, AK5357VT, PST3428U, PST3809U, M65672WG-C, UPD72852AGB-8EU, UPD72893AGD-LML PEG034B (JCKB ASSY : IC202) •...
  • Page 109 Pin Name Signal Name Function Active P64/-CTS1/-RTS1/CLKS1 − BUSY Communication line for firmware download/monitor SYS controller communication line (Tuner → Main) − P63/TxD0 SSTTOM SYS controller communication line (Main → Tuner) − P62/RxD0 SSMTOT ↑ P61/CLK0 SYS controller communication line (clock) Tuner →...
  • Page 110 Pin Name Signal Name Function Active SYS → Tuner handshake ↓ P16/D14/-INT4 HSMTOT P15/D13/-INT3 DCTRI P14/D12 MUTE MUTE control P13/D11 SU/SAPID SAP detection P12/D10 ST/STID Stereo detection (STID) P11/D9 XRESET System Reset output P10/D8 LDASH P07/D7 STBYQ P06/D6 P05/D5 I/BG P04/D4 XP_SAVE P03/D3...
  • Page 111 RS5C372A (JCKB ASSY : IC203) • Real Time Clock IC Block Diagram Alarm_A Register Comparator_A (WEEK, MIN, HOUR) Alarm_B Register 32kHz Output Comparator_B Control (WEEK, MIN, HOUR) OSCIN Driver Time Counter Correction (SEC, MIN, HOUR, WEEK, DAY, MONTH, YEAR) OSCOUT 6 Address Address Detect...
  • Page 112 LC75342M (JCKB ASSY : IC601) • Electric Volume IC Block Diagram 4 TEST LVref Control 3 VSS Circuit 2 CE Logic 1 DI Circuit Interface 30 CL Control 29 VDD Circuit RVref 28 Vref 27 NC Pin Function Pin Name Function Pin Name Function...
  • Page 113 LA73033M (JCKB ASSY : IC701) • Video selector and Video driver Block Diagram DVR-520H-S...
  • Page 114 AK5357VT (MAIN ASSY : IC3101) • 96kHz 24 bit ∆∑ ADC Pin Arrangement (Top view) Block Diagram AGND DGND MCLK AINR CKS0 Clock AINL CKS2 Divider CKS1 ∆∑ Decimation AINL LRCK VCOM Modulator Filter AGND SCLK ∆∑ Decimation AINR SCLK Modulator Filter MCLK...
  • Page 115 PST3428U (MAIN ASSY : IC4003) • Reset IC Pin Arrangement (Top view) Block Diagram VOUT VOUT Vref VSS 4 Pin Function Pin Name Function VOUT Reset signal output Power supply / voltage detection Not connected PST3809U (MAIN ASSY : IC4005) •...
  • Page 116 M65673WG-A (MAIN ASSY : IC1001) • Signal Processing IC for DVD Recorder Pin Arrangement (Top view) B C D E F G H L M N P R T U V W Y AA AB AC AD AE AF AG AH I/O buffer list Buffer Name Main Function...
  • Page 117 Pin Name list DVR-520H-S...
  • Page 118 Pin Function BALL BALL Pin Name Function Pin Name Function Address Address − − VDD3 VDD3 3.3V I/O power supply VRT10 TOP side reference voltage − − Ground VRM10 Common voltage − − 1.2V LOGIC power supply VRB10 Bottom side reference voltage −...
  • Page 119 BALL BALL Pin Name Function Pin Name Function Address Address − 111 J27 SDRAM ENC, Output buffer 166 VDD3 VDD3 3.3V I/O power supply − 112 GND Ground 167 C25 AT1DATA[11] ATAPI-DVD, Bidirectional buffer 113 J26 EADRS[11] SDRAM ENC, Output buffer 168 D24 AT1DATA[10] ATAPI-DVD, Bidirectional buffer...
  • Page 120 BALL BALL Pin Name Function Pin Name Function Address Address − 221 B18 AT2DATA[2] ATAPI-HDD, Bidirectional buffer 276 VDD3 VDD3 3.3V I/O power supply − 222 GND Ground 277 C11 AMCLK2 CLOCK, Input buffer − 223 A18 AT2DATA[1] ATAPI-HDD, Bidirectional buffer 278 GND Ground −...
  • Page 121 BALL BALL Pin Name Function Pin Name Function Address Address − − 331 GND Ground 386 VDD 1.2V LOGIC power supply − 332 E5 ARADRS[10] , Output buffer 387 GND Ground SDRAM-ATAPI 333 D4 SRCBCKI AUDIO, Input buffer 388 L3 SPIDATAI HOST, Bidirectional buffer −...
  • Page 122 BALL BALL Pin Name Function Pin Name Function Address Address − 441 V1 DADRS[0] SDRAM-DEC, Output buffer 496 VDD 1.2V LOGIC power supply − 442 GND Ground 497 AD4 HDACK[0] Output buffer, 4mA 443 V2 DADRS[1] SDRAM-DEC, Output buffer 498 AF1 HDREQ[1] HOST, Input buffer −...
  • Page 123 BALL BALL Pin Name Function Pin Name Function Address Address TEST, nput buffer 551 AD10 HDCS[1] HOST, Output buffer 606 AG16 − − 552 GND Ground 607 GND Ground 553 AG9 DQMWS[1] HOST, Output buffer 608 AF16 TEST, Output buffer −...
  • Page 124 BALL BALL Pin Name Function Pin Name Function Address Address − 661 AD22 IREF[0] VIDEO-Analog 669 AD23 REC656O[4] VIDEO-Digital, Output buffer − VIDEO-Analog 662 AF24 IREF[1] 670 AH27 REC656O[3] VIDEO-Digital, Output buffer VIDEO-Analog 663 AG25 YOUT 671 AG26 REC656O[2] VIDEO-Digital, Output buffer −...
  • Page 125 UPD72852AGB-8EU (MAIN ASSY : IC5101) • IEEE1394 Physical IC Pin Arrangement DGND TpBias1 SCLK IC (DL) TpA1p TpA1n CTL0 TpB1p CTL1 TpB1n DGND AGND TpBias0 TpA0p TpA0n TpB0p DGND TpB0n AGND DGND AGND Block Diagram TpA0p TpA0n SUS/RES Cable Port 0 TpB0p TpB0n LREQ...
  • Page 126 Pin Function • Cable Interface Pins Pin Name Function TpA0p Port 0 twisted pair cable A positive phase I/O TpA0n Port 0 twisted pair cable A negative phase I/O TpB0p Port 0 twisted pair cable B positive phase I/O TpB0n Port 0 twisted pair cable B negative phase I/O TpA1p Port 1 twisted pair cable A positive phase I/O...
  • Page 127 • Control Pins Pin Name Function Power class set input This pin status will be loaded to Pwr_class bit which allocated to PHY register 4H. IEEE1394a-2000 chapter [4.3.4.1] Configuration manager capable setting This pin status will be loaded to Contender bit which allocated to PHY register 4H. 0 : Non contender 1 : Contender Power on reset input...
  • Page 128 UPD72893BGD-LML (MAIN ASSY : IC5202) • IEEE1394 Link IC Pin Arrangement RESETB PHY_D7 BR_MON PHY_D6 IC (PL) PHY_D5 DV_INT 3.3VDD IC (PL) PHY_D4 PHY_D3 PHY_D2 3.3GND 3.3GND PHY_D1 PHY_D0 CTL1 CTL0 2.5GND 2.5VDD P_D15 SCLK P_D14 LREQ P_D13 3.3VDD LINKON P_D12 STREAM10 P_D11...
  • Page 129 Block Diagram 16-bit Timer High-speed Unit D Internal ROM <TMD> 192 kbytes CPU Core High-speed Host Internal ROM Interface 60 kbytes <UART> 175, 174, 172, 171, A [17 : 0] EEPROM 169-167, 165-156 Interface 196, 194-189, <CSI> D [15 : 0] Memory 186-178 Controller...
  • Page 130 Pin Function (1) Link relation Pin Name Function Active Link-on signal input − LINKON Clock input When LPS is active, input 0. Link power status output − Link power OFF : 0 Link power ON : 2.7 MHz pulse output (20 dividing of host clock 54 MHz) −...
  • Page 131 (3) Audio interface pins Pin Name Function Active − AMCLK48 Audio master clock input for sampling frequency 48 kHz − AMCLK44 Audio master clock input for sampling frequency 44 kHz − AMCLKO Audio master clock output Audio PCM serial data At 2ch : System 1 (data of audio block 1) −...
  • Page 132 (5) Host interface pins (a) Parallel interface pins Pin Name Function Active Chip select input of parallel interface Read and write control input of parallel interface ISA type bus, SH-1 bus: Write strobe 68000 bus : Read/write selection signal IO read control input of parallel interface ISA type bus, SH-1 bus : Read strobe 68000 bus : Data strobe (DS) IOCHRDY...
  • Page 133 (6) External ROM connection pins (a) Flash ROM interface pins Pin Name Function Active External ROM data bus 196, 194-189, − D [15 : 0] Data bus in the external ROM access. 186-178 Process of pull-up or pull down is necessary. 175, 174, 172, External ROM address bus −...
  • Page 134 (8) Power supply and ground pins Pin Name Function Active 5, 31, 52, 63, 3.3V power supply − − 78, 95, 127, 3.3VDD 3.3V positive power supply pins. Power supply for 3.3V interface I/O. 140, 166, 187 14, 67, 2.5V power supply −...
  • Page 135: Outline Of The Product

    7.3 OUTLINE OF THE PRODUCT Main newly developed technologies 1. Pickup 4. DV-signal-processing LSI The pickup supports quadruple-speed recording for the DVD- The DV-signal-processing LSI consists of the following two R/RW. chips: A liquid-crystal tilt servo system is adopted for the pickup. •...
  • Page 136: System Configuration

    System configuration In each signal-processing LSI of the main function blocks, various processes have been integrated into one chip, which enables simpler system configuration. With the AV-signal- processing LSI at the center, video inputs/outputs, audio inputs/outputs, DV inputs/outputs, writer and various memory cells are connected to it.
  • Page 137 New functions and specifications In this model, the following new functions and specifications 5. Improved Still Picture menu in Video mode have been included in addition to those of conventional models: The disc NAVI function, which enables displaying a list of recorded titles with still pictures, is enabled in Video mode 1.
  • Page 138: Cautions On Handling The Hdd

    7.4 CAUTIONS ON HANDLING THE HDD (1) Cautions on Handling the HDD • The HDD is very sensitive to shocks and vibrations. Care must be taken especially during operation (when the power is on). • The HDD is very sensitive to electrostatic charges. •...
  • Page 139 Outline and part No. of the HDDs *Pioneer's part No. is not stamped. Maxtor Western Digital Seagate Model Pioneer's Pioneer's Pioneer's Capacity Manufacture's Manufacture's Manufacture's Name Part No. Part No. Part No. Part No. Part No. Part No. (for service)
  • Page 140: Disc/Content Format

    7.5 DISC/CONTENT FORMAT supported; specifically, Pro, Lossless, Voice and VBR) Disc / content format playback • DRM (Digital Rights Management) file playback: No compatibility (see also DRM in the Glossary on page 97) • File extensions: .mp3, .wma (these must be used for General disc compatibility the recorder to recognize MP3 and WMA files –...
  • Page 141: Cleaning

    7.6 CLEANING Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools: Position to be cleaned Cleaning tools Pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 Position to be cleaned Cleaning tools Fans Cleaning paper : GED-008...
  • Page 142: Panel Facilities

    8. PANEL FACILITIES 8.1 FRONT SECTION Front panel 2 3 4 STANDBY/ON PULL-OPEN OPEN/CLOSE REC ONE TOUCH COPY DV IN/OUT STANDBY/ON ONE TOUCH COPY Press to switch the recorder on/into standby. Press to start One Touch Copy of the currently playing title to DVD or the HDD.
  • Page 143: Rear Panel Connections

    TVs, VCR or other source component for recording. CONTROL IN Use to control this recorder from the remote sensor of another Pioneer component with a CONTROL OUT terminal and bearing the Pioneer mark. Connect the CONTROL OUT of the other component to the CONTROL IN of this recorder using a mini-plug cord.
  • Page 144 8.3 DISPLAY Display 7 8 9 15 16 + / = Arrows indicate the copy direction between the HDD Lights when a timer recording has been set. ) and DVD ( (Indicator blinks if the timer has been set to DVD but there isnít a recordable disc loaded , or the timer has •...
  • Page 145: Remote Control

    8.4 REMOTE CONTROL Remote control Press to select the DVD for recording or playback. DVD playback functions AUDIO Changes the audio language or channel. (When the ST ANDBY/ON OPEN/CLOSE ONE TOUCH COPY recorder is stopped, press to change the tuner audio.) SUBTITLE Displays/changes the subtitles included in...
  • Page 146 CM SKIP (commercial skip) Press repeatedly to skip progressively forward on the disc. ¢ PREV / NEXT Press to skip to the previous or next title/chapter/ track/folder; or to display the previous or next menu page. STEP/SLOW During playback, press to start slow-motion playback;...
  • Page 147 DVR-520H-S...
  • Page 148: Jigs List

    7 Jigs list Name Jig No. Remarks Service Remote Control Unit GGF1381 adjustment, diagnosis DVD Test Disc (DVD-Video) GGV1025 Check of DVD-Video DVD Recorder Data Disc GGV1179 (*) diagnosis (ID data setting) Flexible Cable (40P) GGD1370 diagnosis of Drive Assy (*) : GGV1134 is now released, however GGV1179 will be released in JUNE/2004.

This manual is also suitable for:

Dvr-520h-s

Table of Contents