Playback; Introduction; Navigating Discs And The Hdd - Pioneer DVR-532H-S Operating Instructions Manual

Playback

Chapter 7
Playback

Introduction

Most of the features described in this chapter make use
of on-screen displays. Navigate these using the
and ENTER. To go back one level from any screen, use
the RETURN button. Remember also that the button
guide at the bottom of every screen shows which buttons
do what.
Many of the functions covered in this chapter apply to the
HDD, DVD discs, Video CDs, WMA/MP3 discs and CDs,
although the exact operation of some varies slightly with
the kind of disc loaded. The following icons are provided
to help you quickly identify which instructions you need
for which kind of disc.
Any kind of DVD, DVD-R or DVD-RW
DVD
Commercially produced DVD or finalized
DVD-Video
Video mode DVD-R/RW
Video mode DVD-R/RW (unfinalized)
Video mode
VR mode DVD-R/RW
VR mode
HDD
HDD
Audio CD
CD
Video CD
Video CD
WMA or MP3 files
WMA/MP3
• Some DVD-Video discs don't allow certain playback
controls to operate at certain points in the disc. This
is not a malfunction.
• When playing Video CDs, some functions, such as
making a program list, are not available in PBC
mode. Stop the disc first, then start playback by
pressing .
• For discs that contain JPEG picture files, see The
PhotoViewer on page 85.
About DualDisc playback
A DualDisc is a new two -sided disc, one side of which contains
DVD content –video, audio, etc. –while the other side contains
non-DVD content such as digital audio material.
The non-DVD, audio side of the disc is not compliant with the
CD Audio specification and therefore may not play.
It is possible that when loading or ejecting a DualDisc, the
opposite side to that being played will be scratched. Scratched
discs may not be playable.
The DVD side of a DualDisc plays in this product. DVD-Audio
content will not play.
For more detailed information on the DualDisc
specification, please refer to the disc manufacturer or
disc retailer.

Navigating discs and the HDD

ALL
During playback you can easily jump to another title,
chapter or track on a disc using the number buttons on
the remote.
DVD-Video Video mode
1 During playback use the number buttons to
enter a chapter number within the current title.
For example, for chapter 6, press 6; for chapter 24,
press 2, then 4.
• To clear and start again, press CLEAR.
2 Optionally: Press ENTER.
• Alternatively, just wait a few seconds and playback
will jump to the new chapter.
HDD
1 During playback, use the number buttons to
input a title number.
For example, for title 6, press 6; for title 24, press 2,
then 4.
• To clear and start again, press CLEAR.
CLEAR
ENTER
07
57
En