Setting The Picture Quality For Disc Playback - Pioneer DVR-532H-S Operating Instructions Manual

The Video/Audio Adjust menu
12
• White AGC – Turn on for automatic white level
1
adjustment.
• White Level – Adjusts the intensity of white.
• Black Level – Adjusts the intensity of black.
• Black Setup – Corrects the standard reference black
level.
• Gamma Correction – Adjusts the brightness of
darker images.
• Hue – Adjusts overall balance between red and
green.
• Chroma Level – Adjusts how rich the colors appear.
4 Use the
selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
You can now use the preset for any other input or the
built-in TV tuner.
Tip
• To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
Setting the picture quality for disc
playback
This setting determines how the picture will look when
playing discs.
Choosing a preset
1 With a disc playing (or paused), press HOME
MENU and select 'Video/Audio Adjust'.
2 Select 'Video Adjust'
3 Use the
There are six presets available:
• TV(CRT) – suitable for standard cathode-ray tube TVs
• PDP – suitable for plasma display screens
• Professional – suitable for professional monitors
Note
1.When White AGC is On, the White Level setting can't be adjusted.
90
En
buttons to adjust the currently
buttons to change the setting.
TV(CRT)
Detailed Settings
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual settings for
the current preset (TV(CRT), PDP or Professional).
4 Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings for disc playback.
1 Follow Choosing a preset above and select one of
the user presets (Memory 1, 2 or 3).
2 Move the cursor down and select 'Detailed
Settings'.
Memory1
Detailed Settings
3 Select the picture quality setting you want to
adjust.
Memory1
Prog. Motion
PureCinma
YNR
BNR
Detail
White Level
Black Level
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive.
• PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually this is best left set to
Auto 1; try switching to Auto 2, On or Off if the
picture appears unnatural.
• YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• BNR – Adjusts the amount of noise reduction (NR)
applied to the block noise (artefacts visible in areas of
flat color, caused by MPEG compression).
• Detail – Adjusts how sharp edges appear.
• White Level – Adjusts the intensity of white.
Motion Still
Auto1
Off Max
Off Max
Max
Off
Min Max
Min Max