Getting Started; Switching On And Setting Up - Pioneer DVR-532H-S Operating Instructions Manual

Getting started

Chapter 4
Getting started

Switching on and setting up

When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video output settings.
If you're using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
STANDBY/ON
1 Switch on your TV and set the video input to this
recorder.
2 Press the STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn't appear, you can also access it from the
Initial Setup menu; see page 92).
3 Use the buttons to select an OSD language,
then press ENTER.
Initial Setup
Basic Clock Setting Language
Basic
Tuner Help
Video Out Setup Navigator Setup Navigator
Audio In
Audio Out
Language
Recording
Playback
This will also set the audio, subtitle and DVD menu
language preferences.
Note
1.If you want to adjust the clock after EPG data is downloaded, you must reset the unit to its default settings. You can then set the clock manually
from the Initial Setup menu.
ENTER
English
English
français
4 With 'Start' highlighted press ENTER to start
using the Setup Navigator.
• Highlight Cancel if you want to exit here.
Initial Setup
Basic Clock Setting
Basic
Complete this setup before you
Tuner Help
start using your recorder.
Video Out Setup Navigator Setup Navigator
Audio In
Audio Out
Language
Please use the Initial Setup if you
Recording want to make more detailed settings.
Playback
5 Use the buttons to select 'Antenna' or
'Cable' depending on how you receive your
terrestrial TV channels, then press ENTER.
You can also select Do not set if you don't need the
recorder to retune all the channels (if you're using the
Setup Navigator for a second time, for example).
Initial Setup
Basic Clock Setting Auto Channel Setting
Basic
Tuner Help
Video Out Setup Navigator Setup Navigator
Audio In
Audio Out
Language
Recording
Playback
After selecting Antenna or Cable the recorder starts
automatic tuning. This takes a couple of minutes to
complete.
Tuning
Cancel
If EPG data is downloaded, the clock will automatically be
set and you can skip to step 7 below.
6 Select 'Auto' for automatic time setting, then
press ENTER.
Initial Setup
Basic Clock Setting Clock Setting
Basic
Tuner Help
Video Out Setup Navigator Setup Navigator
Audio In
Audio Out
Language
Recording
Playback
Start English
Cancel
English
Antenna
Cable
Do not Set
7/68
1
Auto Auto
Manual
04
25
En