Manual Clock Setting; Time Zone; Auto Clock Setting - Pioneer DVR-541H-S Operating Instructions Manual

Getting started
04
• You can go back to the previous screen
at anytime in the Setup Navigator by
pressing RETURN.
ENTER
• Select your country.
k Setting
k Setting Country Selection
t Line System Line System
er Save er Save Country
P
• Auto-tuning channels
The Auto Scan option automatically scans
and sets the channel presets.
Tuning
ENTER
6 Select 'Auto' for automatic
time setting, or 'Manual' to set the clock
manually.
k Setting Clock Setting
Line System
Auto
er Save Auto
P Manual
•

Auto clock setting

Some TV channels broadcast time
signals together with the program. This
recorder can use these signals to set the
clock automatically.
Set 'Clock Set CH' to the channel
preset number that broadcasts a time
signal, then move the cursor down to
'Start' and press ENTER.
k Setting Auto Clock Setting
Line System
Date
er Save
Time
P
p Navigator p Navigator
Clock Set CH
28
En
Mexico
32/68
Cancel
– – / – – / – –––
– – : ––
2
S t art
The recorder takes a short while to set
the time. After you see that it's set, select
Next to proceed.
k Setting Auto Clock Setting
Line System
Date S UN 01 / 01 / 2006
er Save
Time 00 : 00
P
p Navigator p Navigator
Clock Set CH
If the time could not be set
automatically, press RETURN to go back
to the previous screen and select
Manual.
•

Manual clock setting

If no stations in your area are
broadcasting time signals, you can set
the clock manually.
Use the buttons to set your

time zone.

You can set this by selecting a city or a
time relative to GMT.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
Baja California Norte
P
p Navigator p Navigator D.S.T. Off
Press then use the
select 'On' or 'Off' for daylight saving
(D.S.T.), then press ENTER.
Select On if you are currently using
daylight saving.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
Baja California Norte
P
p Navigator p Navigator D.S.T. On
2
St art
Ne xt
1/2
Mexico
buttons to
1/2
Mexico