Pioneer DVR-532H-S Operating Instructions Manual page 46

Using the TV Guide On Screen™ interactive program guide
05
1 Highlight the 'Change Channel Display' item.
2 Press ENTER to display the channel editor.
3 Use the
press ENTER to go to the Grid Options menu.
From the Grid Options menu you can set:
• tune channel – the channel number that the
channel listing is tuned to
• service – the type of service that the channel
operates on (cable, cable box, etc.)
• channel – On (display in channel list), Off (don't
display) or Auto Hide (hide when no program
information available
• position – place that the channel appears in the
channel list
46
En
buttons to highlight a channel then
4 When you've made all the settings you want for
the channel, highlight 'done' then press ENTER.
• To cancel without saving any of the changes you
made, select cancel.
Changing the Default Options
This is the place to change the default settings for
recordings, reminders and other general settings.
1 Select the 'Change Default Options' item.
2 Select one of the three default option categories.
A different menu panel appears for each option:
General default options
• Info box size – the initial size of the information box
(no, small, large, last used)
• box cycle – the cycle behavior of the information box
(no only, small only, large only, no & small, no &
large, small & large, all)
• auto guide – Display TV Guide On Screen guide
automatically when you switch on the recorder (On,
Off)
Record defaults
• start – when to start a recording (up to 120 mins
earlier or later than set, or On time)
• end – when to end a recording (up to 120 mins earlier
or later than set, or On time)
• recorder – by default, record to DVD or HDD
• quality – recording quality
Remind defaults
• auto tune – automatically tune to the correct
channel when a reminder becomes due (On or Off)
• when – when to display the reminder (15 mins early
to 15 mins late, or On time)