HP 3600 v2 series Configuration Manual page 82

Task
Setting the spanning tree mode
Configuring the device priority
Configuring the timeout factor
Configuring the maximum port rate
Configuring
Configuring edge ports
the leaf
Configuring path costs of ports
nodes
Configuring the port priority
Configuring the port link type
Enabling the output of port state transition
information
Enabling the spanning tree feature
Performing mCheck
Configuring protection functions
Complete the following tasks to configure MSTP:
Task
Setting the spanning tree mode
Configuring an MST region
Configuring the root bridge or a secondary root bridge
Configuring the device priority
Configuring the maximum hops of an MST region
Configuri
Configuring the network diameter of a switched network
ng the
Configuring spanning tree timers
root
bridge
Configuring the timeout factor
Configuring the maximum port rate
Configuring edge ports
Configuring the port link type
Configuring the mode a port uses to recognize/send MSTP packets
Enabling the output of port state transition information
Enabling the spanning tree feature
Remarks
Required
Configure the device to work in PVST mode.
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required
Optional
Optional
74
Remarks
Optional
By default, the device
works in MSTP mode.
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required