HP 3600 v2 series Configuration Manual page 81

Task
Configuring edge ports
Configuring path costs of ports
Configuring the port priority
Configuring the port link type
Configuring the mode a port uses to recognize/send MSTP
packets
Enabling the output of port state transition information
Enabling the spanning tree feature
Performing mCheck
Configuring TC snooping
Configuring protection functions
Complete the following tasks to configure PVST:
Task
Setting the spanning tree mode
Configuring the root bridge or a secondary
root bridge
Configuring the device priority
Configuring the network diameter of a
switched network
Configuring
Configuring spanning tree timers
the root
bridge
Configuring the timeout factor
Configuring the maximum port rate
Configuring edge ports
Configuring the port link type
Enabling the output of port state transition
information
Enabling the spanning tree feature
Remarks
Required
Configure the device to work in PVST mode.
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required
73
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Required
Optional
Optional
Optional