Ericsson DT400 User Manual page 85

Hide thumbs Also See for DT400:
Table of Contents

Advertisement

ISDN
LEAST COST ROUTING
LOCK CODE
MAILBOX
MESSAGE
MUTE
PASSWORD
PBX
PRE-DEFINED TEXT
THIRD PARTY
TIE LINE
TRANSFER
TRUNK LINE
BusinessPhone 250 / BusinessPhone 50
Portable DT400 / DT410 / DT420 / DT430
Integrated Services Digital Network. Provides your system with supplementary services
from the public net.
A function that automatically selects the cheapest way to connect your external call
(not necessarily the shortest distance). See section "Least cost routing".
A four-digit code needed to lock your portable to prevent misuse. See "Security".
The mailbox system controls the messages that are left for or sent by you when you are
absent. See section "Mailbox system".
A message can be sent to any extension. This is useful when you receive the busy tone
or get no answer. There are two kinds of message: 1."Call me" message. 2. Voice
message. See section "Internal messages".
To switch the microphone temporarily off. See section "During calls".
A four-digit code needed to retrieve messages from the mailbox system.
Please ask your system administrator for your password.
Public Branch Exchange. Your telephone switching system (e.g. BusinessPhone 250).
Pre-programmed absent information. See section "Information".
A third connection (person), which can be included in an ongoing two person
conversation. The connection can be internal or external. See section "During calls".
An external line from the private network.
During an internal or external ongoing call you can make an inquiry and then
transfer the call to another party (internal or external).
See section "During calls" and "Useful hints".
A trunk line is the same as an external line. Can be either digital or analogue.
GLOSSARY
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dt430Businessphone 250Businessphone 50Dt410Dt420

Table of Contents