Networking Best Practices - Shure MXW Manual

MXW
Set Up
1. Open the MXW control software using the Shure Web Device Discovery application.
2. Go to the Utility page.
3. Open the Device Properties window for the two- or four-channel access point (MXWAPT2 or MXWAPT4).
4. Note that the APT is set to Mode A by default (Device View>RF Mode Settings>RF Coordination Mode). Close out of the window.
5. Open the Device Properties for the adjacent APT2 or APT4.
6. Set the unit to Mode B (Device Propterties>RF Mode Settings>RF Coordination Mode).
7. Select Add Updates to save the setting and close the window.
8. Make sure any additional APTs are set to alternating RF Coordination modes.
9. Select Apply All button on the Utility page to update all device settings.
Networking

Networking Best Practices

Use the following best practices when setting up a network to ensure reliable communication:
• Always use a "star" network topology by connecting each component directly to the switch or router.
• Connect networked MXW gear to the same network and set to the same subnet. This ensures best system performance and maximum microphone count.
40/72
Shure Incorporated
2017/05/17