The directional antennas of the APT send and receive the RF signal in a cardioid pattern with the greatest sensitivity toward the face of the device. Always aim
this side toward the microphone coverage area.
Select a Location
The access point is typically mounted to a ceiling or wall near the microphone coverage area. For best results, perform a Spectrum Scan at potential locations
to find the optimal placement (see Wireless Management section for more details).
Use the following best-practices when selecting a location for the device:
•
Direct the face of the access point toward the intended coverage area.
•
Position the access point so there is nothing obstructing a line of sight to the microphones.
•
Keep device away from large metal objects.
•
Keep at least eight feet between access points.
•
Mount with its reset button accessible, as it may be useful for troubleshooting.