Slide the transmitter into the charging slot until it secures into place. The charge LEDs illuminate when the charge cycle begins. Regardless of Group association
or network connection, any microphone can recharge in any NCS.
•
Handheld, boundary and bodypack: use the main vertical slots in the recessed bays.
•
Gooseneck base: uses the top row's horizontal connectors. (Not included on two-channel chargers).
Charge Status LEDs
Each charger channel has a row of LEDs that illuminate to indicate the microphone battery charge level:
LED
1
2
3
4
5
NCS Energy Efficient Mode
Operate the charger in a low-energy mode to reduce power consumption. In this mode, only one LED indicator illuminates per channel after powering on.
To change to the mode:
1. Open the MXW control software to the Utility page.
2. Open the Device Properties window for the charging station.