Requesting Temporary Occupancy; Error Codes; Lock Symbol; Testing Signal Strength - Trane WDS Installation, Operation And Maintenance Manual

Operation

Requesting Temporary Occupancy

Select to request
occupancy
Select to cancel
occupancy

Error codes

Indicates an error code

Lock Symbol

Indicates that a
setting is locked

Testing Signal Strength

Indicates
excellent
signal
strength

Testing Battery Status

Indicates full
battery power
34
• If you need heating or cooling after normal business hours, you can
"request" temporary occupancy by pressing
The occupied symbol remains on the screen and the unoccupied symbol
disappears. After 30 seconds, unoccupied symbol will re-appear.
• To cancel temporary occupancy, press
unoccupied symbol will remain on the screen and the occupied symbol will
disappear. After 30 seconds the occupied symbol will re-appear.
If an error code (E0–E7) is displayed, technical assistance may be required.
The lock symbol appears if you try to adjust a setting that cannot be changed.
Indicates
satisfactory
signal
strength
Indicates 50% Indicates 25% of
of battery life battery life left.
left. Replace batteries.
Flashing symbol
indicates that
approximately 14 days
of operation remain.
and holding it for 2 seconds.
and hold for 2 seconds. The
Indicates
Press the Test button to display the
poor signal
signal strength symbols.
strength
Press the Test button to display the
battery status symbols.
Use only UL-listed non-rechargeable
1.5 V lithium AA batteries (Trane p/n
X13770035010 or equivalent).
Wireless Sensors • BAS-SVX04C-EN