Indicator Lights - Skoda Rapid Operating Instructions Manual

Hide thumbs Also See for Rapid:
Table of Contents

Advertisement

Reset counter for distance travelled (trip)
Press button
» Fig. 25
on page 31.
A
Switch on the ignition.
» Fig. 25
A
Release the button
and the system switches to the hour setting function.
A
Press the button
again and set the hours.
A
Wait around 4 seconds - the system switches to the minutes setting.
Press the button
again and set the minutes.
A
Wait around 4 seconds - the system switches to the start setting.
The time can also be set in the Infotainment
tainment, chapter Device settings.

Indicator lights

Introduction
This chapter contains information on the following subjects:
Fig. 25
Button in the instrument cluster
until the Time is shown in the display.
»
operating instructions for Info-

 
The warning lights in the instrument cluster indicate certain functions or
faults.
Some warning lights can be accompanied by acoustic signals and messages in
32
the display of the instrument cluster.
32
After switching on the ignition, some warning lights light up briefly as a func-
32
tion test.
32
If the tested systems are OK, the corresponding warning lights go out a few
33
seconds after switching on the ignition or after starting the engine.
33
33
34
34
Instruments and Indicator Lights
34
34
34
34
35
35
35
35
35
35
36
36
36
36
36
37
37
37
37
38
38
38
38
38
38
31

Advertisement

Table of Contents
loading

Table of Contents