Table of Contents
Advertisement
Instruments and Indicator Lights
Instrument Cluster
Introduction
This chapter contains information on the following subjects:
Overview
Display
Service interval display
WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
■
sponsible for road safety.
Never operate the controls in the instrument cluster while driving, only
■
when the vehicle is stationary!
Ignoring illuminated warning lights may result in breaking down in traffic,
■
accidents and serious injury.
Never ignore illuminated warning lights.
■
Stop the vehicle as soon as it is possible and safe to do so.
■
A broken-down vehicle is a high accident risk to itself and other road users.
■
If necessary, turn on the hazard warning light system and place the warning
triangle on the side of the road to warn other road users.
Park the vehicle in a safe distance from moving traffic such that no parts of
■
the exhaust system come in contact with highly flammable materials under
the vehicle such as dry grass, fuel.
Roads and bridges may be icy at temperatures above freezing.
■
Ice may be present at temperatures above +4 °C (+39 °F), even if no "ice
■
crystal symbol" is displayed as a warning of black ice.
Never rely only on the outside temperature display!
■
Overview
7
8
8
Fig. 2 Instrument cluster
First read and observe the introductory information and safety warn-
ings
on page 7.
Explanation of the instruments :
Revolutions counter (revolutions x 1000 per minute of the running engine).
1
The start of the red zone in the revolutions counter indicates the maximum
permissible engine speed for all gears for an engine which has been run in
and is operating at normal temperature. Before reaching the red zone, shift
up to the next higher gear, select the selector lever position D, or take your
foot off the accelerator pedal
Display
» page 8
2
Speedometer.
3
Adjust button for the clock.
4
›
Press the button
to select the hour or minute display.
›
To advance the setting, press the
fast forward.
›
Press the
button again to complete setting the clock.
Reset button for the display of the daily trip counter (trip).
5
›
Press the
button to set to zero.
0.0 / SET
» fig. 2
»
.
button
. Press and hold to
5
0.0 / SET
Instruments and Indicator Lights
7
Advertisement
Chapters
Table of Contents
