Replacing the bulb for the fog light
Fig. 177 Remove the number plate light / replace the bulb
Read and observe
and
Remove the protective grille and headlight
›
Insert the clamps for removing the full wheel covers
kit into opening
» Fig.
177.
A
›
Loosen the protective grille by pulling the hook in the direction of arrow
›
Remove the protective grille in the direction of the arrow
›
Unscrew the screws
with the screwdriver from the tool kit.
B
›
With the key
» page
153, Vehicle tool kit unlock the locking
2
of arrow
.
3
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Pull the lamp holder until it stops in the arrow direction
›
Remove the lamp holder in the direction of the arrow
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
7
on page 170 first.
» page
153, Vehicle tool
.
2
C
.
4
.
5
.
6
.
7
.
8
›
Attach the connector.
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 177
and tightening.
›
Insert the protective grille and carefully press it in.
The protective grille must engage firmly.
Replacing the bulb for the licence plate light
Fig. 178 Remove the number plate light/replace the bulb
Read and observe
›
Open the boot lid.
›
Push in the lamp in the direction of the arrow
The lamp comes loose.
›
Swivel out the lamp in the direction of the arrow
›
.
1
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Reinsert the lamp in the opposite direction to the arrow
›
in direction
Push on the light until the spring clicks into place.
Check that the light is securely inserted.
and
on page 170 first.
» Fig.
178.
1
and remove it.
2
Fuses and light bulbs
4
.
3
.
1
173