Headlight Glasses; Door Closing Cylinder; Cavity Protection; Jack - Skoda Rapid Operating Instructions Manual

CAUTION
Information for cleaning windows
Do not clean the inside of the windows with sharp-edged objects or corro-
■
sive and acidic cleaning agents – there is a risk of damaging the heating ele-
ments or window aerial.
When drying the windows after washing the vehicle, do not use window
■
leathers that have been used to polish the bodywork. Residues of preserva-
tives in the window leather can make the window dirty and reduce visibility.

Headlight glasses


Read and observe and
Clean plastic front headlight lenses using clean, warm water and soap.
CAUTION
The headlights are never to be wiped dry - there is a risk of damaging the
■
protective lacquer and the headlight glass subsequently developing cracks.
Do not use sharp objects to clean the glasses - there is a risk of damaging
■
the protective lacquer and the headlight glasses subsequently developing
cracks.
Do not use any aggressive cleaning or chemical solvent products to clean the
■
headlights – risk of damaging the headlight lenses.

Door closing cylinder


Read and observe and
Specific products must be used for de-icing door lock cylinders.
CAUTION
Make sure that as little water as possible gets into the locking cylinder when
washing the vehicle - there is a risk of freezing the lock cylinder!

Cavity protection


Read and observe and
All the cavities of your vehicle which are at risk from corrosion are protected
for life by a layer of protective wax applied in the factory.
This wax protection does not need to be inspected or re-applied.
on page 127 first.
on page 127 first.
on page 127 first.
If any small amount of wax flow out of the cavities at high temperatures, these
must be removed with a plastic scraper and the stains cleaned using a petrole-
um cleaner.
WARNING
Safety regulations should be observed when using petroleum cleaner to re-
move wax – risk of fire!

Jack


Read and observe and
The jack is maintenance-free.
If necessary, the moving parts of the jack should be lubricated with a suitable
lubricant.

Wheels


Read and observe and
Wheel rims
Also thoroughly wash the wheel rims when washing the vehicle on a regular
basis.
Regularly remove salt and brake abrasion, otherwise the rim material will be
corroded.
Light alloy wheels
After washing thoroughly, treat the wheel rims with a protective product for
light alloy wheels.
For the treatment of wheel rims do not use products which may cause damage
to the paint on the rims.
CAUTION
Damage to the paint layer on the wheel rims must be touched up immediate-
■
ly.
Severe layers of dirt on the wheels can also result in wheel imbalance. This
■
may show itself in the form of a wheel vibration which is transmitted to the
steering wheel which, in certain circumstances, can cause premature wear of
the steering. This means it is necessary to remove the dirt.
on page 127 first.
on page 127 first.
Care and maintenance
129