Table of Contents
Advertisement
Computer operating system
Mac OS X 10.10
Mac OS X 10.11
Mac OS X 10.12
Polar Flow mobile application compatibility
•
iPhone 4S or later
•
Android 4.3 or later
Water resistance of Polar products
In the watch industry, water resistance is generally indicated as meters, which
means the static water pressure of that depth. Polar uses this same
indication system. Water resistance of Polar products is tested according to
International Standard ISO 22810 or IEC60529. Every Polar device that has
water resistance indication is tested before the delivery to stand water
pressure.
Polar products are divided into four different categories according to their
water resistance. Check the back of your Polar product for the water
resistance category, and compare it to the chart below. Please note that
these definitions do not necessarily apply to products of other
manufacturers.
When performing any underwater activity, the dynamic pressure generated
by moving in water is greater than the static pressure. This means that
moving the product under water subjects it to a greater pressure than if the
product were stationary.
Marking on
Wash
the back of
splashes,
32-bit
Bathing
Skin
and swim-
diving
36
64-bit
X
X
X
SCUBA
Water resistant
diving
characteristics
Advertisement
Table of Contents
