Push Button Configuration - THOMSON TG185n Setup And User Manual

5
5.1.1

Push Button Configuration

Procedure
Proceed as follows:
1 Shortly press the WPS button on the THOMSON TG185n:
2 The WPS button LED starts blinking green. This indicates that the THOMSON TG185n is now searching
for wireless clients that are in registration mode. You now have two minutes to start WPS on your
wireless client.
If the LED does not start to blink, WPS is not enabled on your THOMSON TG185n. For more
information on how to enable WPS, see
3 Start WPS on your wireless client and choose Push Button Configuration (PBC) as method.
For more information, consult the documentation of your wireless client.
E-DOC-CTC-20080624-0009 v0.2
Your THOMSON TG185n as Wireless Client
" WPS does not work" on page 51.
31