THOMSON TG185n Setup And User Manual page 16

3 The THOMSON TG185n as Wireless Access Point
Configure your wireless clients
In order to connect your wireless clients to the THOMSON TG185n you must configure them with the same
Network ID (SSID) and security as your wireless access point. You can do this:
Automatically via WPS.
For more information, see
Manually entering these settings on the configuration utility of your wireless clients.either using Wi-Fi
Protected Setup (WPS) or manually. For more information, see
Client" on page
Configure your computer to obtain an IP address automatically
For more information, see
10
"3.2 Connecting a Wireless Client via WPS" on page 11
15.
"7.2 Restoring the IP Settings of Your Computer" on page
"3.3 Manually Configuring a Wireless
48.
E-DOC-CTC-20080624-0009 v0.2