Your Thomson Tg185N As Wireless Client - THOMSON TG185n Setup And User Manual

5
5

Your THOMSON TG185n as Wireless Client

Usage
Use this mode if you want to add wireless connectivity to an Ethernet device (for example: a laptop, a gaming
console with Ethernet connectivity,...):
Terminology
The wireless access point to which we will try to connect can both be a stand-alone wireless access point or a
built-in wireless access point (for example, your Internet Gateway may be equipped with a wireless access
point). In the following pages we will just refer to it as your access point.
Default behaviour
If the THOMSON TG185n is still using its factory default settings, it will automatically repeat the strongest
unsecured network.
Configuring your THOMSON TG185n
If your access point:
Supports WPS, see
Does not support WPS or you don't know if it does or not, see
on page 33.
E-DOC-CTC-20080624-0009 v0.2
Your THOMSON TG185n as Wireless Client
"5.1 Automatic Configuration (Via WPS)" on page 30.
"5.2 Manual Configuration (Without WPS)"
29